RS-500DS (5155051)

Stainless Steel Spray Wash Cabinet / Dual-Heaters / Low-Water Shutoff


The stainless-steel Ranger RS-500DS spray wash cabinet will rapidly degrease all of the dirty parts in your garage. From larger truck and SUV engine components, to even your smallest nuts and bolts, this 50-gallon capacity parts washer will make your car parts shine like new!

Starting at $7575
FREE SHIPPING!

$7575
$
Save $
FREE SHIPPING!
Buy Now
RS-500DS Stainless-Steel Parts Washer with Dual Heaters
User Manual Download
Sales Sheet Download
Warranty Download

Powerful, Safe and Rapid Hot Wash with a new Stainless-Steel Cabinet by Ranger

Spray wash cabinets have a new face with a completely stainless steel construction and top-of-the-line features! The RS-500DS has all of the key features and components that make the RS-500D a superior automotive parts washer, with an additional rust-free stainless steel construction. This high-quality stainless steel is entirely resistant to deterioration and the harmful effects of rust, which ensures that your parts washer was built to stand the test of time.

Like the RS-500D, the RS-500DS parts washer utilizes the latest in spray wash cabinet technology to degrease the dirtiest and bulkiest parts in your garage. With a wide cabinet space—and the removable parts tree for your smaller car parts—the RS-500DS provides a deep clean on automotive parts of every shape and size. The 30” diameter turntable ensures an evenly distributed wash, while the powerful multi-directional spray jets and detergent do all the heavy lifting.

Like every piece of Ranger equipment, this spray wash cabinet was designed with the features and quality that sets it a cut above the rest. With professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut off and stainless steel oil skimmer, the RS-500DS demonstrates Ranger’s commitment to enhanced performance and productivity. Some of these features like the oil skimmer and tank drain, as well as the stainless steel nozzles and contamination-proof cabinet welds, keep your parts washer looking and working its best no matter how dirty things may get. The quality can be seen in every facet, from the new rust-free stainless steel construction to the non-marring castors, the RS-500DS has a rugged and heavy-duty build that will easily outlast the competition.

Stainless steel construction

The RS-500DS comes with an all-new stainless steel construction that is specifically designed to resist rust and is made with a hardness that can stand up to any test. This stainless steel spray wash cabinet will keep your parts looking as shiny as it does!

Fast-release door latch

The quick-release door latch is ideal for quick and easy accessibility. It safely locks and seals your spray wash cabinet for use, and is easily released with just a quick flick of the wrist. This locking method assures that your cabinet door is sealed completely, keeping everything inside the cabinet instead of on your floor.

Neoprene door seal

The cabinet is sealed with a leak-proof neoprene door that creates an edge-to-edge seal and prevents water and steam from escaping. Keeping steam inside creates a better water retention which improves cleaning efficiency.

Movable filter basket

A removable filter basket makes monthly maintenance easy, keeping your parts washer clean and ready to go. This filter traps any particle larger than 1/8”, so you can be sure that your tank water remains free of any build up that could cause harm

Multi-directional sprayers

These stainless steel, multi-directional sprayers attack dirt and grime from all angles, ensuring an even and powerful wash. Plus their quality construction is ultra-resistant to deterioration or defect.

Steel oil skimming system

Stainless steel oil skimmer miraculously separates oil and grime from the water which further increases the longevity of your detergent solution. Oil is directed outside the cabinet into a holding container for disposal.

Contamination-proof cabinet welds

Contamination proof welds cover the full perimeter of the inside of the spray wash cabinet, perfectly sealing the wash are from the detergent tank, preventing any potential cross contamination. Even microscopic debris that could potentially cause clogging is redirected and filtered out, eliminating downtime and helping to make maintenance a breeze.

Stainless steel nozzles

Multi-directional nozzles are constructed from rust-free stainless steel that is resistant to wear and clogging. These high-quality sprayer nozzles have a sharply articulated spray grid that provides a powerful wash, blasting away dirt and grime for a superior clean look.

Low water shutoff

Because low water levels can be damaging to both the heaters and pump, an automatic low water shutoff switch cuts the power when water levels get too low. This switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level. This corrosion resistant switch saves you valuable time and money by preventing irreversible pump-seal damage or heating coil burnout.

Dual heaters

Spray wash cabinet water temperature is raised within seconds thanks to the dual water heaters that keep your water primed and ready at all times. During washing cycles the larger primary heater activates, quickly raising the temperature of the cleaning solution for optimum cleaning efficiency.

NEMA-rated electrical panel

Each spray-wash cabinet comes with a NEMA-rated electrical box that plays a critical role in the management of your parts washer. Well-organized wiring makes circuits, control breakers easily identifiable and prevents breaker tripping and enhances overload protection. An audible and visual alarm is also activated when the low-water sensor detects unsafe operating conditions, stopping operation until water level is restored and the button is reset.

Double-pole circuit breaker

The Eaton Cutler-Hammer 20/30 amp Quadplex Double-Pole Type BR Circuit Breaker features a 2-pole, 20 amp breaker for the heater and a separate 2-pole, 30 amp breaker for the motor and pump combination. 

Non-marring casters

Despite a 500-lb. weight capacity, the RS-500DS is fairly easy to move thanks to heavy-duty, non-marring casters. These casters have an easy lock and release system that allows you to place your parts washer anywhere in the garage. With a sturdy urethane construction casters are impervious to harsh conditions and roll smoothly without leaving any marks behind.

Durable turntable

A friction-drive system provides the power behind the parts washer which helps to eliminate potential motor damage by reducing the risk of jamming components.

Industrial casters and convenient tank drain

Industrial-strength swivel casters provide easy movement, giving you the freedom to reposition your parts washer anywhere with ease. Ranger parts washers also include convenient, built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly.

Safety switch and timer dial

Key features help maintain the safety and efficiency of the parts washer such as the safety switch that automatically shuts off the washing cycle while the door is open, and the timer dial that allows you to set wash times manually.

Removable tree rack and components basket

Parts washers come standard with a quick-mount parts tree rack and components basket that is ideal for cleaning smaller components. Parts tree rack instantly expands cabinet space and makes cleaning small nuts, bolts and screws as easy as placing them in the basket.

Commercial-grade pump / motor combination

Ranger parts washers come standard with a centrifugal commercial grade pump that is specifically engineered for parts washing applications. Made of high-quality parts like the rust-resistant stainless steel impellers and screw nuts, the pump and motor is over-designed to last. While the pump does all the heavy lifting, a protective covering comprised of 100% ductile cast iron and silicon carbide seals protect the sensitive machinery within from any damage.

Hot cleaning

A nickel-based, alloy-sheathed heater element—specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button.

Thermostat

Adjustable set point thermostat allows you to adjust the heating range up to 1​80°F.

Double-pole circuit breaker

The Eaton Cutler-Hammer 20/30 amp Quadplex Double-Pole Type BR Circuit Breaker features a 2-pole, 20 amp breaker for the heater and a separate 2-pole, 30 amp breaker for the motor and pump combination. 

Aluma-Klean soap removes oil, stains and grease with ease

Ranger’s Aluma-Klean spray-wash detergent is a mild parts cleaning soap designed to clean aluminum, stainless and other delicate parts without whitening the surface. Aluma-Klean parts cleaning soap is not a solvent, but rather a non-foaming, low pH, mild-alkali, water-soluble, powdered detergent especially formulated for high pressure heated parts washing systems. Incredible cleaning action removes grease, oil, baked on stains, carbon, protein and even some paints.

Features & Specs

RS-500DS specs diagram
  • Heavy-duty stainless steel construction
  • Safe aqueous operation: No harsh chemicals
  • 50 gallon tank
  • Dual water heaters for quick startup
  • Heated cabinet w/ adjustable thermostat
  • High-power spray jets clean parts fast
  • Automatic low water shutoff
  • Removable tank screen
  • Stainless oil skimmer
  • Removable parts tree
  • Powder coat finish
  • Stainless steel nozzles
  • Full opening octagonal door
  • Large drain pipe
  • Heavy-duty casters
  • Friction-drive turntable system
  • Neoprene-sealed wash cabinet
  • Contamination-proof interior welds
  • Gasket-free door
  • Small parts basket
  • Stainless steel handles
  • Free bucket and soap included
Overall height:
66" (1,676 mm)
Inside height:
43" (1,092 mm)
Inside width:
32" (813 mm)
Turntable diameter:
30" (762 mm)
Tank capacity:
50 gallons
Load capacity:
500 lbs. (227 kg)
Cycle timer:
0 - 60 min
Recommended floor space:
44" x 43" (1,118 mm x 1,092 mm)
Brass nozzles:
18
Steel construction:
12 Gauge / .109 thickness
Pump output:
75 psi @ 70 gpm
Motor:
1 HP / 208-230V / 60 Hz / 1 Ph or 3 HP / 380-415V / 50 Hz / 3 Ph
Electric heater:
6 kW
Water temperature:
160° - 180° F (71° - 82° C)
Shipping weight:
750 lbs. (336 kg)
Shipping dimensions:
36" x 44" x 68" (914 mm x 1,118 mm x 1,727 mm)
The RS-500DS is an ALI Certified Car Lift

RS-500DS Reviews

Interested in the RS-500DS?