Skip to content

Instant Rebate Savings 0% Financing • Ends Sept 30

SHOP NOW
GO BACK
BendPak Brand Logo

BendPak PL6000DC Two-Post Parking Lift - 6,000-lbs. Capacity - Shared Columns

SEE REVIEWS
IN STOCKSKU 5176260
$9,995.00
Financing as low as $218/moApply now

Flexible business financing available through Navitas.

BendPak PL-6000DC 6,000-lb. two-post parking lift for space-saving garage storage
BendPak PL6000DC shared-column parking lift with a space-saving minimal footprint.
Two cars stacked on a BendPak PL-6000DC two-post parking lift inside a modern garage.
BendPak PL6000DC daisy-chained shared-column two-post parking lift system.
BendPak PL6000DC shared-column two-post parking lifts for vehicle collection storage.
BendPak PL6000DC shared-column two-post parking lifts storing a car collection.
BendPak PL-6000DC two-post parking lift hydraulic cylinder and chain lifting system.
BendPak PL-6000DCX two-post wide parking lift control detail for easy operation
BendPak PL6000DC two-post parking lift with raised platform and approach ramp.
Collector cars stacked on a BendPak PL-6000DC two-post parking lift in a private garage.
1
Ask An Expert

Expected to Ship: Aug 25, 2026

SALES FLYERMANUALWARRANTY

Parking Lift / 6,000-lbs. Capacity / Two-Post / Shared Columns

BendPak PL6000DC Two-Post Parking Lift - 6,000-lbs. Capacity - Shared Columns
$9,995.00

Double Your Parking Without Doubling the Footprint

The BendPak PL6000DC Two-Post Parking Lift is built for facilities that need more parking capacity without wasting valuable floor space. With a 6,000-lb. capacity and a dual-column, shared-column design, it gives operators a practical way to stack vehicles for long-term storage above and short-term access below. Designed for real estate developers, architects, engineers, automotive dealers, commercial parking operators, and serious vehicle storage environments, the PL6000DC fits inside a typical 8-foot parking space and accommodates most cars and light trucks. It is engineered for both indoor and outdoor installations, giving facilities more ways to make limited parking areas work harder.
Shared Columns Turn Tight Parking Areas Into Real Capacity

Shared Columns Turn Tight Parking Areas Into Real Capacity

The PL6000DC uses a ganged column design that allows multiple installations in minimum space. Posts can be shared between units, helping reduce cost and improve parking density when multiple lifts are installed side by side. That shared-column architecture is what makes the PL6000DC so useful for commercial parking layouts. Instead of adding more land, more structure, or more frustration, facilities can add vertical capacity within a smarter lift footprint.

Low Operating Cost and Dependable Hydraulic Operation

The PL6000DC is designed with operating efficiency in mind. When lowering, the platform is gravity-driven, which means no electric motor consumption is required during descent. That helps reduce operating costs over time, especially in parking environments where lifts may be used frequently. A single direct-drive hydraulic cylinder eliminates the need for screw mechanisms and supports smoother operation, better reliability, and lower maintenance costs. The overhead power unit provides smooth and quiet hydraulic performance, while compact packaging and detailed installation documentation help simplify setup and handling.
Low Operating Cost and Dependable Hydraulic Operation
Safety Systems That Keep the Platform Under Control

Safety Systems That Keep the Platform Under Control

Automatic load-holding devices engage and lock the lift structure as the PL6000DC raises, helping prevent sudden free fall in the unlikely event of suspension component failure. Once the platform reaches the desired height, operators can lower it onto the locks to minimize wear on suspension components and keep the lift securely supported. The PL6000DC also includes an electric key switch, automatic shut-off when the key is released, emergency stop button, upper limit switch, hydraulic overloading protection, pressure relief valve, pressure-compensated flow control valve, and mechanical safety locks spaced every 4 inches. That is the kind of control a parking lift needs when it is holding a vehicle above another one.

Recommended Add-ons

Accessories for the BendPak PL6000DC Two-Post Parking Lift - 6,000-lbs. Capacity - Shared Columns

BendPak PL6000DC add-on parking lift for expanding two-post parking lift capacity.
BendPak PL6000DC Add-On Platform and Column Set - Fits PL6000DC
$9,395.00
LEARN MORE
BendPak extended aluminum approach ramps designed for compatible PL-6000DC and PL-6000DCX parking lifts.
BendPak PL6000DC and PL6000DCX Extended Aluminum Drive-Thru Ramps - 36-inch - Set of 2
$1,000.00
LEARN MORE

Specifications

Style

Style
Two-Post Parking Lift
Number of Platforms
1

Capacity

Lifting Capacity
6000 lb

Rise and Locking

Max Lifting Height
82.5 in
Lock Release
Manual Release
Lifting Time
60 seconds

Overall Dimensions

Width
100.25 in
Length
163.5 in
Height
131 in

Platform and Runways

Platform Width
82.5 in
Platform Length
157 in

Power and Controls

Voltage
208-240V / 50/60 Hz / 1-Phase
Amperage
22 Amps
Sound Level
52 dB

Shipping and Delivery

Shipping Method
Flatbed
Offload Requirement
Forklift
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak at [email protected]

CALIFORNIA PROP 65

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.