Skip to content

Instant Rebate Savings • 0% Financing • Ends Dec 31

SHOP NOW
GO BACK
BendPak Brand Logo

BendPak PL6000DC Add-On Platform and Column Set - Fits PL6000DC

SEE REVIEWS
IN STOCKSKU 5176262
$9,395.00
Financing as low as $205/moApply now

Flexible business financing available through Navitas.

BendPak PL6000DC add-on parking lift for expanding two-post parking lift capacity.
BendPak PL-6000DCX add-on platform and column set for expanding a shared-column parking lift system.
BendPak PL6000DC shared-column two-post parking lifts storing a car collection.
BendPak PL6000DC shared-column two-post parking lifts for vehicle collection storage.
BendPak PL6000DCX 6,000-lb capacity parking lift for luxury car storage.
BendPak PL6000DC shared-column parking lift with a space-saving minimal footprint.
BendPak PL6000DCX daisy-chained shared-column parking lift layout.
BendPak PL6000DCX daisy-chained shared-column parking lifts with low-profile approach ramps.
BendPak PL6000DC two-post parking lift with raised platform and approach ramp.
BendPak PL-6000DCX two-post wide parking lift control detail for easy operation
1
Ask An Expert

Expected to Ship: Oct 23, 2026

SALES FLYERMANUALWARRANTY

Parking Lift / Add-On Platform and Column Set / Fits PL6000DC

BendPak PL6000DC Add-On Platform and Column Set - Fits PL6000DC
$9,395.00
Expand Parking Capacity Without Starting Over

Expand Parking Capacity Without Starting Over

The BendPak PL6000DC Add-On Platform and Column Set is built for facilities that already understand the value of shared-column parking and want to expand capacity with a system designed around the PL6000DC platform. Instead of treating additional parking as a separate installation problem, this add-on set helps extend the PL6000DC layout with compatible platform and column hardware. For real estate developers, architects, engineers, automotive dealers, and commercial parking operators, that scalability matters. The PL6000DC system is designed to fit inside a typical 8-foot parking space, accommodate most cars and light trucks, and support both long-term upper-level parking and more frequent vehicle access below.
Shared Columns Make Dense Parking Smarter

Shared Columns Make Dense Parking Smarter

The shared-column design is one of the major advantages of the PL6000DC system. By allowing multiple parking lifts to be installed in minimum space, the layout helps increase vehicle density without turning the facility into a maze of standalone structures. When installed in ganged configurations, the PL6000DC add-on approach can reduce duplicated column requirements and help make better use of available space. That makes it especially useful for parking garages, residential developments, dealership inventory areas, and commercial facilities where every bay has to work harder.

Commercial-Grade Platform Design for Daily Parking Use

The PL6000DC platform is built around commercial-grade design and construction, with a galvanized and corrugated anti-slip surface that supports vehicle parking in demanding environments. Full-width channel-locked center panels help protect the lower vehicle, while the wide deck platform accommodates pickups, vans, and cars. The platform can be stopped at different heights to fit various vehicles and ceiling heights, giving operators more flexibility in real-world parking layouts. Designed for installation on typical parking surfaces, the system is built to support both indoor and outdoor parking applications where dependable daily use matters.
Commercial-Grade Platform Design for Daily Parking Use
Hydraulic Operation and Safety Systems Built Into the PL6000DC Platform

Hydraulic Operation and Safety Systems Built Into the PL6000DC Platform

The PL6000DC system uses hydraulic lifting with direct-drive cylinder operation, automatic safety lock engagement, anti-fall protection, hydraulic overloading protection, and mechanical safety locks spaced every 4 inches. An electric key switch, automatic shut-off when the operator releases the key, 24VAC operator controls, emergency stop button, pressure relief valve, and upper limit switch all support safer operation. Maintenance-free composite carriage bearings help reduce ongoing service needs, while the overhead power unit supports smooth, quiet hydraulic operation. For facilities expanding an existing PL6000DC parking system, this add-on set keeps the focus where it belongs: more usable parking with controlled operation and fewer headaches.

Recommended Add-ons

Accessories for the BendPak PL6000DC Add-On Platform and Column Set - Fits PL6000DC

BendPak extended aluminum approach ramps designed for compatible PL-6000DC and PL-6000DCX parking lifts.
BendPak PL6000DC and PL6000DCX Extended Aluminum Drive-Thru Ramps - 36-inch - Set of 2
$1,000.00
LEARN MORE

Specifications

Style

Style
Two-Post Parking Lift
Number of Platforms
1

Capacity

Lifting Capacity
6000 lb

Rise and Locking

Lock Release
Manual Release
Lifting Time
60 seconds

Power and Controls

Voltage
208-240V / 50/60 Hz / 1-Phase
Amperage
22 Amps
Sound Level
52 dB

Shipping and Delivery

Shipping Method
LTL
Offload Requirement
Forklift

Features

  • •Fits BendPak PL6000DC parking lift systems
  • •Shared column add-on platform and column set
  • •Includes power unit
  • •Ganged column design for multiple installations in minimum space
  • •Commercial-grade design and construction
  • •Galvanized and corrugated anti-slip platform
  • •Designed for installation on typical parking surfaces
  • •Platform can stop at different heights
  • •Full-width channel-locked center panels help protect lower vehicle
  • •Wide deck platform accommodates pickups, vans, and cars
  • •Direct-drive hydraulic cylinder operation
  • •Automatic safety lock combined with anti-fall device
  • •Maintenance-free composite carriage bearings
  • •Electric key switch with automatic shut-off
  • •Hydraulic overloading protection
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak.

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.