Skip to content

Instant Rebate Savings 0% Financing • Ends Sept 30

SHOP NOW
GO BACK
BendPak Brand Logo

BendPak HDSO14P Four-Post Lift - 14,000-lbs. Capacity

SEE REVIEWS
IN STOCKSKU 5175152
$10,390.00$10,995.00
SAVE $605
Financing as low as $219/moApply now

Flexible business financing available through Navitas.

BendPak HDSO14P ALI Certified open-front four-post lift for professional alignment work.
Product 3D model preview
Product 3
Product 4
Product 5
Product 6
Product 7
Product 8
Product 9
Product 10
1
Ask An Expert

Expected to Ship: Sep 1, 2026

SALES FLYERMANUALWARRANTY

Four-Post Lift / 14,000-lbs. Capacity / Open-Front

BendPak HDSO14P Four-Post Lift - 14,000-lbs. Capacity
$10,390.00$10,995.00SAVE $605
Open-Front Four-Post Access for Alignment and Front-End Service

Open-Front Four-Post Access for Alignment and Front-End Service

The BendPak HDSO14P Four-Post Lift brings 14,000-lb. lifting capacity to shops that need serious runway strength with clear front-end access. Its open-front design removes the front cross bar from the work area, giving technicians easier entry beneath the vehicle and better access for alignment, suspension, steering, and front-end service. For busy alignment bays, that added access can turn a frustrating setup into a smoother, faster workflow. Extended runways help the HDSO14P handle a wide range of vehicles, from small cars to full-size trucks, while longer approach ramps make loading low ground-clearance vehicles less dramatic. This is a professional open-front four-post lift built for shops that need capacity, adjustability, and access without giving up BendPak durability.
Patented Front Outriggers for Precise Four-Post Lift Leveling

Patented Front Outriggers for Precise Four-Post Lift Leveling

The HDSO14P uses patented adjustable front outrigger tubes to help fine-tune front-lift leveling. Their infinitely adjustable pitch helps compensate for heavy loads and uneven floors, which is especially valuable in alignment applications where accuracy matters and a sloppy setup can waste time fast. Runways adjust for different tread widths and include a rail kit for optional accessories, giving the lift more flexibility as shop needs change. Optional 7,000-lb. rolling bridge jacks, roll-back kits, drive-thru ramps, and drip trays help turn this open-front four-post lift into a more complete service platform.

Heavy-Duty Cable System Designed for Long Service Life

BendPak built the HDSO14P around a durable lifting system with four high-quality 1/2-inch stainless steel aircraft cables and a single hydraulic cylinder mounted underneath the runway. Each lifting cable is rated at 14,400 lbs., giving the combined cable rating far more strength than the lift’s maximum rated capacity. Oversized 10.5-inch dual-hub cable sheaves work with large sheave axles to reduce cable stress, fatigue, and wear. Fully enclosed lifting cables, safety locks, airlines, and sheaves help protect critical components while keeping the lift structure cleaner and safer for daily shop use.
Heavy-Duty Cable System Designed for Long Service Life
Pneumatic Safety Locks and Controlled Hydraulic Descent

Pneumatic Safety Locks and Controlled Hydraulic Descent

Multiple locking positions allow variable-height parking and service, while a push-button pneumatic safety release disengages all four independent safety locks simultaneously. Spring-loaded safety locks automatically engage continuously as the lift rises, and independent slack-cable safety latches provide backup protection in the unlikely event of cable failure. An integrated hydraulic flow restrictor helps provide controlled descent if a hose rupture ever occurs, while internal anti-sway slider blocks in each column help support smooth, stable lifting. Large base plates and BendPak’s electric-hydraulic power system round out a lift designed for alignment productivity, reliable operation, and long-term shop confidence.
Open-Front Access

Open-Front Access

No front cross bar means easier entry beneath the vehicle and better access for alignment, steering, suspension, and front-end service.
14,000-lb. Capacity

14,000-lb. Capacity

A heavy-duty 14,000-lb. rating gives the HDSO14P the strength to handle a wide range of cars, trucks, and service vehicles.
Adjustable Outriggers

Adjustable Outriggers

Patented adjustable front outrigger tubes help fine-tune leveling for alignment work and uneven shop floors.
Longer Approach Ramps

Longer Approach Ramps

Extended approach ramps help reduce loading angle for vehicles with lower ground clearance.
Oversized Sheave System

Oversized Sheave System

Large dual-hub cable sheaves and heavy-duty aircraft cables help reduce wear and extend component life.
Bridge Jack Ready

Bridge Jack Ready

Rail-equipped runways support optional RJ7W rolling bridge jacks for full wheel and brake service capability.

Specifications

Capacity

Lifting Capacity
14000 lb

Rise

A Min Runway Height
7.75 in
B Max Rise
70 in
C Max Lifting Height
77.5 in

Outside Dimensions

D Width
143.25 - 130 in
E Outside Length
215.5 in
F Overall Length
244.5 in
G Height
103.25 - 92 in

Inside Dimensions

H Inside Columns
123 - 120 in
I Drive-Thru Clearance
98 in

Runways

J Runway Width
20 in
K Runway Length
197.5 in
L Width Between Runways
42 in
M Runway Centerline
65 in
N Outside Edge of Runways
85 in

Minimum Wheelbase

Rated Wheelbase Capacity
140 in
25% Capacity
80 in
50% Capacity
100 in
75% Capacity
120 in

Locking

Locking Positions
15
Locking Spacing
4 in

Power Unit and Voltage

Horsepower
2 HP
Voltage
208-230V / 60 Hz / 1-Phase
Sound Level
45 dB

Shipping and Delivery

Shipping Dimensions
22 x 218 x 43 in
Shipping Weight
3238 lb
Shipping Method
Flatbed
Offload Requirement
Forklift
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak at [email protected]

CALIFORNIA PROP 65

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.