Skip to content

Instant Rebate Savings • 0% Financing • Ends Dec 31

SHOP NOW
GO BACK
BendPak Brand Logo

BendPak HDSO14AX Open-Front Alignment Lift - 14,000-lbs. Capacity

SEE REVIEWS
IN STOCKSKU 5175153
$14,395.00
Financing as low as $303/moApply now

Flexible business financing available through Navitas.

BendPak HDSO14AX ALI Certified open-front alignment lift with turnplates and slip plates.
Product 3D model preview
BendPak HDSO14AX Open-Front Alignment Lift - 14,000-lbs. Capacity, image 3
BendPak HDSO14AX Open-Front Alignment Lift - 14,000-lbs. Capacity, image 4
BendPak HDSO14AX open-front four-post alignment lift for precision wheel alignment service.
BendPak HDSO14AX Open-Front Alignment Lift - 14,000-lbs. Capacity, image 6
BendPak HDSO14AX Open-Front Alignment Lift - 14,000-lbs. Capacity, image 7
1
Ask An Expert

Expected to Ship: Nov 3, 2026

SALES FLYERMANUALWARRANTY

Alignment Lift / 14,000-lbs. Capacity / Extended / Open Front / Includes Turnplates and Slip Plates

BendPak HDSO14AX Open-Front Alignment Lift - 14,000-lbs. Capacity
$14,395.00
Open-Front Alignment Access Without the Front-End Fight

Open-Front Alignment Access Without the Front-End Fight

The BendPak HDSO14AX Open-Front Alignment Lift is built for shops that want heavy-duty alignment capability without a front crossbar blocking the work area. With 14,000-lb. lifting capacity, extended alignment runways, front turn plates, and rear multi-caster slip plates, this open-front four-post lift gives technicians the access and precision needed for serious alignment and front-end service. The open-front design makes it easier to enter and exit beneath the vehicle, helping speed up front-end adjustment, steering work, suspension inspection, and alignment setup. For busy alignment bays, that difference is not subtle. It is the kind of access advantage technicians notice immediately.
Patented Outriggers and Free-Floating Alignment Hardware

Patented Outriggers and Free-Floating Alignment Hardware

The HDSO14AX uses patented adjustable front outrigger tubes that help fine-tune front-lift leveling. Their infinitely adjustable pitch can compensate for heavier loads and sloped floors, which is especially valuable when alignment accuracy and runway position matter. Rear-facing multi-caster slip plates and front-facing turn plates support precise, free-floating alignment work. Two recessed turn plate pockets allow technicians to position galvanized, corrosion-resistant turn plates as needed, while runways adjust for different tread widths and include rail kits for optional accessories.

Oversized Sheaves, Aircraft Cables, and Built-In Lubrication

BendPak equips the HDSO14AX with oversized 10.5-inch cable sheaves, 2.25-inch sheave axles, and four heavy-duty 1/2-inch, 6 x 25 aircraft-quality steel lifting cables routed through the columns. These components are built to support years of commercial alignment work while helping reduce cable wear and service demands. Grease fittings help keep the sheaves lubricated and the cable system operating smoothly. The lift structure routes cables, sheaves, airlines, and critical components internally, keeping the system cleaner, better protected, and visually cleaner in the bay.
Oversized Sheaves, Aircraft Cables, and Built-In Lubrication
Auto-Leveling Safety Locks and Push-Button Pneumatic Release

Auto-Leveling Safety Locks and Push-Button Pneumatic Release

The HDSO14AX includes an automatic leveling system, multiple auto-leveling locking positions, and spring-loaded safety locks that engage as the platforms rise. This design helps keep the lift stable and level, even when the shop floor has a slight slope. A push-button pneumatic lock release disengages the locks simultaneously for even platform descent, while a secondary slack-cable lock system helps stop operation if dangerous cable slack is detected. Optional RJ-7 bridge jacks add wheel-service capability, giving this open-front alignment lift the flexibility to support alignments, wheel work, brake service, and suspension jobs.
Open-Front Access

Open-Front Access

No front crossbar gives technicians easier under-vehicle entry for alignment, front-end, steering, and suspension work.
Patented Outriggers

Patented Outriggers

Adjustable front outrigger tubes help fine-tune lift leveling under heavy loads or uneven floor conditions.
14,000-lb. Capacity

14,000-lb. Capacity

Heavy-duty lifting strength supports demanding alignment work on cars, trucks, SUVs, and commercial service vehicles.
Free-Floating Alignment

Free-Floating Alignment

Front turn plates and rear multi-caster slip plates help wheels move cleanly during alignment adjustments.
Push-Button Release

Push-Button Release

Pneumatic lock release helps all four locks disengage at once for smooth, even lowering.
Bridge Jack Compatible

Bridge Jack Compatible

Optional RJ-7 bridge jacks add full wheel-service capability for brake, tire, and suspension jobs.

Specifications

Capacity

Lifting Capacity
14000 lb

Rise

A Min Runway Height
7.75 in
B Max Rise
77.5 in
C Max Lifting Height
70 in

Outside Dimensions

D Width
143.25 - 130 in
E Outside Length
215.5 in
F Length
244.5 in
G Height
103.25 - 92 in

Inside Dimensions

H Inside Columns
123 - 120 in

Runways

J Runway Width
20.5 in
K Runway Length
197.5 in
L Width Between Runways
42 in

Alignment

M Min 4-Wheel Alignment
89 in
N Max 4-Wheel Alignment
156 in
O Max 2-Wheel Alignment
182 in

Minimum Wheelbase

Rated Wheelbase Capacity
140 in
75% Capacity
120 in
50% Capacity
100 in
25% Capacity
80 in

Locking

Locking Positions
15
Locking Spacing
4 in

Power Unit and Voltage

Voltage
208-230V / 60 Hz / 1-Phase
Sound Level
< 70 dB(A)

Shipping and Delivery

Shipping Dimensions
25 x 219 x 48 in
Shipping Weight
3828 lb
Shipping Method
Flatbed
Offload Requirement
Forklift

Features

  • •14,000-lb. lifting capacity
  • •Open-front design with no front crossbar
  • •Heavy-duty turn plates included
  • •Integrated rear slip plates included
  • •Multi-position turn plate pockets
  • •Patented adjustable front outrigger tubes
  • •Automatic leveling system
  • •Multiple auto-leveling locking positions
  • •Runways include rail kit for optional accessories
  • •Electric-hydraulic power system
  • •Single hydraulic cylinder mounted underneath runway
  • •Fully enclosed lifting cables, safety locks, and sheaves
  • •Internal Anti-Sway UHMW slider blocks in each column
  • •Oversized self-lubricating cable sheaves and 1/2-inch aircraft cable
  • •Optional 7,000-lb. capacity bridge jacks available
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak.

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.