Skip to content

Instant Rebate Savings 0% Financing • Ends Sept 30

SHOP NOW
GO BACK
APEX Brand Logo

APEX 48-inch Lightweight Foam Trailer Ramp Kit - Set of 2

IN STOCKSKU 5174145
$446.00
Product 1
Product 3D model preview
Product 3
Product 4
Product 5
Product 6
Product 7
Product 8
Product 9
Product 10
1
Ask An Expert

Expected to Ship: Aug 21, 2026

Lightweight Foam Trailer Ramp Kit / 48-in. / 5-in. Height / 5.9� Approach Angle / Set of 2

APEX 48-inch Lightweight Foam Trailer Ramp Kit - Set of 2
$446.00

Sports Cars Get a Smarter 48-Inch Trailer Ramp

The APEX 48-inch Lightweight Foam Trailer Ramp Kit is designed for low cars that need more than a quick fix at the trailer door. This set extends your trailer approach and lowers the loading angle to 5.9 degrees, giving sports cars, track builds, lowered muscle cars, and long-overhang vehicles a smoother path onto the deck without relying on lumber stacks or guesswork. At 48 inches long with a 5-inch height, this kit sits in the practical middle ground between compact storage and meaningful clearance improvement. It gives trailer owners enough length to make a visible difference at the breakover point while still staying easy to carry, position, and store between hauls.
Sports Cars Get a Smarter 48-Inch Trailer Ramp
Tuned Trailer Geometry for a Smoother 5.9-Degree Approach

Tuned Trailer Geometry for a Smoother 5.9-Degree Approach

The 48-inch length and 5-inch rise are tuned around real trailer doors and the real cars that fight them. The 5.9-degree approach angle softens the transition where the tire climbs from the ground to the ramp and then onto the trailer surface, helping protect low splitters, front lips, and underbody components. This size is especially useful for users who want a better trailer-loading experience without jumping straight to longer 60-inch or 72-inch ramp sections. It gives many modern performance cars the extra margin they need while keeping loading fast and predictable.

Solid EPS Core with Embedded UHMW Trailer Interface

Each 48-inch APEX ramp is built around a high-density expanded polystyrene structural core. The solid, closed-cell design distributes weight through the ramp body, helping it resist sagging, denting, moisture absorption, and the hollow feel common to lower-grade ramp materials. The trailer contact shelf is reinforced with an embedded UHMW insert to help prevent compression and deformation at the point where most ramps take the hardest abuse. That reinforcement keeps the trailer interface stable so the ramp angle stays consistent over time.
Solid EPS Core with Embedded UHMW Trailer Interface
Polyurea-Coated Trailer Ramps That Grip, Protect, and Carry Easily

Polyurea-Coated Trailer Ramps That Grip, Protect, and Carry Easily

The EPS core is fully encapsulated in a high-performance polyurea coating that bonds to the ramp body and helps resist abrasion, impact, chemicals, water, oil, and UV exposure. Its micro-textured surface provides grip against tires and trailer decks so the ramps feel controlled while the vehicle climbs. Integrated thermoplastic handles are molded into each ramp body for easy one-handed movement. Since there is no metal to rust, ring, or scratch coated floors, the 48-inch APEX trailer ramp kit is built to live in the trailer and work every time it is needed.
Balanced 48-Inch Size

Balanced 48-Inch Size

The 48-inch length gives trailer owners a stronger clearance upgrade without becoming oversized. It is a practical fit for sports cars, track builds, and lowered street vehicles.
5.9-Degree Loading Angle

5.9-Degree Loading Angle

The 5.9-degree approach helps smooth the transition from floor to trailer deck. That extra margin can make low front ends much easier to load.
Embedded UHMW Contact Shelf

Embedded UHMW Contact Shelf

A reinforced UHMW insert protects the high-stress trailer interface. It helps prevent the shelf from crushing or rolling over after repeated loading cycles.
Closed-Cell EPS Core

Closed-Cell EPS Core

The solid foam core spreads vehicle load through the ramp body and resists moisture absorption. It keeps the ramp light in your hands and stable under the tire.
Chemical-Resistant Coating

Chemical-Resistant Coating

The polyurea outer shell resists abrasion, water, oil, UV, and common automotive chemicals. Its texture adds grip without relying on loose mats or blocks.
One-Hand Carry Design

One-Hand Carry Design

Molded thermoplastic handles make each ramp easy to grab and position. Setup stays fast, clean, and far better than wrestling scrap lumber.

Specifications

Product Details

Configuration
Set of 2 Trailer Ramps
Intended Use
Extending trailer door/ramps for low-profile vehicles

Capacity

Load Capacity Per Ramp
1750 lb
Load Capacity Per Pair
3500 lb
Individual Item Weight
7 lb

Dimensions

A Length
48 in
B Width
14 in
C Height
5 in
D Trailer Shelf
4 x 2 in
F Approach Angle
5.9 degrees

Construction

Core Material
High density expanded polystyrene (EPS) structural foam
Coating Material
Textured polyurea elastomer

Shipping and Delivery

Shipping Dimensions
16 x 49 x 7 in
Shipping Weight
16 lb
Shipping Method
Parcel

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.