Skip to content

Instant Rebate Savings 0% Financing • Ends Sept 30

SHOP NOW
GO BACK
APEX Brand Logo

APEX 72-inch Lightweight Foam Garage Ramp Kit - Set of 2

IN STOCKSKU 5174162
$725.00
Product 1
Product 3D model preview
Product 3
Product 4
Product 5
Product 6
Product 7
Product 8
Product 9
Product 10
1
Ask An Expert

Expected to Ship: Aug 21, 2026

Lightweight Foam Garage Ramp Kit / 72-in. / 10-in. Lift / 9.5� Approach Angle / Set of 2

APEX 72-inch Lightweight Foam Garage Ramp Kit - Set of 2
$725.00
Maximum Underbody Access Without Dragging Out a Lift

Maximum Underbody Access Without Dragging Out a Lift

The APEX 72-inch Lightweight Foam Garage Ramp Kit is built for drivers and home garage owners who want the tallest working height in the APEX garage ramp lineup without dragging heavy metal ramps across the floor. With 10 inches of lift, a 72-inch run, and a 9.5-degree approach angle, this set gives performance cars, street cars, and many lowered vehicles a controlled path onto the ramps while opening up serious room for underbody work. This is the garage ramp kit for oil changes, exhaust checks, underbody inspections, suspension access, and longer service jobs where a few extra inches make a big difference. Instead of stacking lumber, fighting jack stands, or working inches off the concrete, you can roll onto a purpose-built pair of ramps designed to turn a standard garage into something that feels much closer to a mini service bay.
10 Inches of Lift with a Low-Car-Aware Approach

10 Inches of Lift with a Low-Car-Aware Approach

The 72-inch length is not just about size. It gives the vehicle more room to climb gradually, helping the chassis rotate in a smooth, predictable arc from the garage floor to the top of the ramp. That controlled rise helps protect front lips, splitters, and longer overhangs that would struggle with shorter, steeper garage ramps. For drivers who want real working height without giving up low-car compatibility, the 72-inch APEX ramp hits the top end of the lineup. The 9.5-degree approach angle and 10-inch lift make it the strongest choice when maximum underbody access matters, especially for owners who regularly work beneath the car and want more space to see, reach, and move.

Solid Structural Foam Core That Stays Planted

At the core of each 72-inch APEX garage ramp is a high-density structural foam body that distributes vehicle load through the full ramp profile. This is not hollow plastic, thin metal, or a temporary workaround. The closed-cell core feels solid under the tire and resists permanent compression over time, helping the ramp maintain the lift height and support you bought it for. The foam construction also keeps the ramp light enough for one person to move and position, even at this longer size. Integrated molded carry zones make it easier to grab, place, and store each ramp without turning every maintenance job into a wrestling match with steel.
Solid Structural Foam Core That Stays Planted
Textured Coating Built for Real Garage Floors

Textured Coating Built for Real Garage Floors

APEX encapsulates the structural foam core in a rugged textured coating that helps protect the ramp from abrasion, impacts, oil, chemicals, and normal garage abuse. The surface is designed to grip both tire tread and common floor surfaces, including bare concrete, sealed concrete, and epoxy-coated floors. Because there is no metal body, the ramps will not rust or gouge decorative garage floors. The long base, broad contact area, and grippy surface help the ramps stay composed during drive-on use, giving owners a cleaner, safer-feeling setup for serious underbody access at home or in a small shop.
Tallest APEX Garage Ramp

Tallest APEX Garage Ramp

Provides 10 inches of lift for the most underbody access in the APEX garage ramp lineup. Ideal for owners who want more room for oil changes, inspections, exhaust work, and longer service tasks.
72-Inch Controlled Run-Up

72-Inch Controlled Run-Up

The long ramp length helps the vehicle climb gradually instead of pivoting hard at the front edge. That smoother transition is friendlier to lips, splitters, and long overhangs.
9.5-Degree Approach Angle

9.5-Degree Approach Angle

Designed to work with performance cars and many lowered vehicles that need a calmer climb. It gives low cars a realistic path onto a taller service ramp.
High-Density Foam Core

High-Density Foam Core

Solid closed-cell structural foam spreads load through the full ramp body. It feels stable under tire and resists permanent compression over repeated use.
Textured Garage Grip

Textured Garage Grip

The rugged coating helps grip tires and common garage flooring while protecting the ramp from scuffs, impacts, oil, and chemicals.

Specifications

Specification Diagram 1
Specification Diagram 2

Product Details

Configuration
Set of 2 Garage Ramps
Intended Use
Drive on lift for maintenance, inspection, repair

Capacity

Load Capacity Per Ramp
1750 lb
Load Capacity Per Pair
3500 lb
Individual Item Weight
12 lb

Dimensions

A Length
72 in
B Width
14 in
C Height
12 in
D Tire Rest Height
10 in
E Tire Rest Length
10.75 in
F Approach Angle
9.5 degrees

Construction

Core Material
High density expanded polystyrene (EPS) structural foam
Coating Material
Textured polyurea elastomer

Shipping and Delivery

Shipping Dimensions
16 x 73 x 15 in
Shipping Weight
25 lb
Shipping Method
Parcel

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.