EV Battery Lift Tables for Modern Vehicle Service
As electric vehicles become more common, automotive shops, dealerships and service centers need equipment designed to safely handle large, heavy EV battery packs. BendPak Mobi-EVS EV battery lift tables provide the lifting capacity, stability and maneuverability technicians need for EV battery removal, installation and service.
Designed for more than EV batteries alone, Mobi-EVS lift tables can also support engines, transmissions, fuel tanks, transaxle assemblies and other heavy vehicle components. Their compact, mobile design makes them easy to position throughout the shop, providing a versatile lifting solution for both electric and conventional vehicle service.
Frequently Asked Questions
BendPak Mobi-EVS lift tables are full-rise, battery-powered mobile scissor lift tables designed for the safe removal, installation, transport, and positioning of heavy EV battery packs and powertrain components. Their versatility also makes them useful for servicing engines, transmissions, drivetrains, fuel tanks, transaxles, suspension assemblies, and other heavy vehicle components.
The primary difference is lifting capacity. The EVS3000 is rated for up to 3,000 lbs., while the EVS4500 increases capacity to 4,500 lbs., making it suitable for heavier battery packs and powertrain assemblies, including applications ranging from passenger EVs to commercial vehicles. Both models share the Mobi-EVS platform's mobile, full-rise design and precision positioning capabilities.
No. While the EVS3000 and EVS4500 are purpose-built for EV battery service, they can also support a variety of components found in internal combustion engine vehicles. With compatible adapters and accessories, Mobi-EVS tables can assist with powertrains, drivetrains, transmissions, fuel tanks, transaxles, suspension components, and other heavy assemblies.
The Mobi-EVS platform can rise to more than six feet, giving technicians a broad working range for removing, lowering, transporting, positioning, and reinstalling EV batteries and other components. The platform can reach full rise in approximately 18 seconds, helping improve efficiency during demanding service procedures.
The EVS3000 and EVS4500 are designed to provide precise positioning when aligning large battery packs and powertrain components beneath a vehicle. Screw-jack adjustments allow technicians to control roll, pitch, and yaw, making fine adjustments easier when aligning mounting points during removal and installation.
No. Both models use a 12V DC power system with a rechargeable deep-cycle battery, allowing cordless operation without extension cords or air lines trailing across the service bay. This untethered design makes it easier to move the lift table between vehicles and service bays.
The Mobi-EVS is designed for single-person lift operation using an attached pendant controller. Technicians can control raising and lowering while positioning themselves where they have a clear view of the component and surrounding work area.
Both models are designed with mobility in mind. Multi-directional swivel casters help technicians maneuver and change direction, while a full-width U-shaped push/pull handle provides greater control when moving the table. A tri-caster locking system helps improve straight-line travel when positioning the unit.
The tabletop uses durable ultra-high molecular weight polyethylene, or UHMW, which protects the surface against wear while providing low friction so heavy components can be repositioned more easily. The material also serves as an insulating barrier between electrical components and the conductive steel platform beneath it.
The Mobi-EVS design incorporates a Multi-Point Safety Lock system that automatically engages as the platform rises and can be released through the pendant controls. The EVS3000 and EVS4500 also feature a redesigned base and scissor structure, a wider safety assembly, and structural enhancements intended to improve stability and durability.
Yes. Multiple recessed anchoring locations on the platform accommodate modular fixtures, adapters, and accessories that expand the tables beyond EV battery service. Available configurations can help technicians support and position powertrains, drivetrains, transmissions, subframes, and other specialized components.
Yes. Their rechargeable battery power, compact footprint, and mobile design allow the EVS3000 and EVS4500 to move between service bays instead of being permanently dedicated to one workstation. This can be especially valuable for dealerships, EV service centers, fleet facilities, and repair shops where battery or powertrain work is performed in multiple bays.
According to BendPak, the Mobi-EVS Series is recommended by leading automotive OEMs for servicing a range of electric vehicles as well as vehicles with internal combustion engines. Shops should still follow the individual vehicle manufacturer's service procedures and use the appropriate fixtures and adapters for each application.
The Mobi-EVS Series combines 3,000- or 4,500-lb. lifting capacity, full-rise operation, cordless mobility, precise multi-axis positioning, and adaptable component support in one platform. Instead of limiting the equipment to occasional EV battery replacements, shops can configure it for a wider range of powertrain and component service, helping make the lift table a more versatile part of the modern service bay.
Have a Question?
Whether you’re exploring BendPak, looking for the right equipment, or need help with a product you already own, our team is here to point you in the right direction.