Skip to content

Instant Rebate Savings • Financing Available • Ends Dec 31

SHOP NOW
GO BACK
MaxJax Brand Logo

MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity

SEE REVIEWS
IN STOCKSKU 5176051
$5,725.00
Financing as low as $125/moApply now

Flexible business financing available through Navitas.

MaxJax MAX7 Portable Two-Post Car Lift Supreme Package 5176051
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 2
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 3
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 4
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 5
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 6
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 7
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 8
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 9
MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity, image 10
1
Ask An Expert

Expected to Ship: Nov 5, 2026

SALES FLYERMANUAL

MaxJax MAX7 Supreme Portable Car Lift Package - 7,000-lbs. Capacity
$5,725.00

MAX7 Supreme: More Options at the Lift. More Comfort Around the Car.

Different jobs call for different lifting setups. The MaxJax MAX7 Supreme Package equips your garage with a 7,000-lb.-capacity portable two-post car lift, tall adapters and frame cradle pads for compatible lifting points, plus an oil drain and rolling work seat for the service that follows. It is a package built around setup flexibility and the way you move around a vehicle. The improved MAX7 brings BendPak’s Automatic Swing Arm Restraint System (ASARS™) into that workflow. ASARS automatically locks the swing arms as the lift rises to help prevent unintended arm movement. You also gain 3 inches of lift height over the previous M7K, with telescoping screw pad adapters now included as standard equipment.
MAX7 Supreme: More Options at the Lift. More Comfort Around the Car.
Give Your Lifting Setup More Ways to Fit the Job

Give Your Lifting Setup More Ways to Fit the Job

The Supreme Package adds tall adapters for additional pad-height options and frame cradle pads for compatible frame lifting points. The MAX7’s newly included telescoping screw pad adapters provide a 1.5-inch lift-pad adjustment range for fine-tuning contact height. These accessories give the package a clear advantage for owners who want more setup options at the vehicle’s approved lifting points. Adjustable arms extend from 26.5 to 41.25 inches, measured from the pivot to the center of the lift pad. Select the appropriate contact accessories and configure the arms for the vehicle being serviced. Supreme brings that lifting-point flexibility together with a rolling work seat for the service work around the car.

Pull Up a Seat for the Next Round of Service

Wheel, brake and inspection work can mean moving from one side of the car to the other. The included rolling work seat gives you a mobile place to sit, while the oil drain adds equipment for collecting used oil when maintenance calls for it. The Supreme Package brings those practical service tools together with its expanded lifting-point accessories. The MAX7’s extra 3 inches of lift height create more working clearance, reaching a maximum of 50.25 inches with the lift pad at its high setting and one stackable adapter. Seven lift-height safety lock positions let you select a working height for the task. These height locks operate separately from the ASARS swing-arm restraint system.
Pull Up a Seat for the Next Round of Service
A Capable Service Bay That Can Give Your Space Back

A Capable Service Bay That Can Give Your Space Back

Equip the garage for service without assigning the floor to one use forever. MAX7 columns bolt securely to the floor while lifting. After the work is complete and the vehicle is lowered, the columns can be disconnected, unbolted and rolled aside. Recessed drop-in anchors preserve the prepared mounting locations for future use. Choose column spacing from 105 to 135 inches between base plates to suit the installation. A hydraulically equalized system synchronizes lifting, and a mobile cart supports the hydraulic power unit and flow divider. The Supreme Package combines that adaptable lift layout with contact accessories and seated working comfort for a garage that handles more than one kind of job.

More Choices at the Contact Points

Tall adapters add pad-height options, while frame cradle pads accommodate compatible frame lifting points. Supreme equips you to select the appropriate contact setup for the vehicle you are servicing.

ASARS Helps Keep the Arms in Place

BendPak’s Automatic Swing Arm Restraint System brings 360° holding grip to the MAX7. The arms lock automatically as the lift rises to help prevent unintended movement during lifting and service.

A Seat That Moves with the Work

Bring seated comfort to service around the car with the included rolling work seat. The package’s oil drain also gives you equipment for collecting used oil when the job calls for it.

Raise Your Working Clearance

Supreme includes the MAX7’s 3-inch increase in lift height over the M7K. Maximum lift height reaches 50.25 inches with the pad at its high setting and one stackable adapter.

Dial In Pad Height

Four telescoping screw pad adapters now come with the MAX7. Their 35 mm pins and 1.5-inch pad-adjustment range bring fine height adjustment alongside the Supreme Package’s separate tall adapters.

Keep the Bay Useful Between Jobs

Secure the columns to the floor for lifting, then remove and roll them aside for storage. Recessed anchors keep the mounting locations prepared while your garage returns to its next use.

Specifications

Capacity

Lifting Capacity
7000 lb
Max Capacity Per Arm
1750 lb

Rise

C Max Lifting Height with Pad
50.25 in
D Min Lifting Height with Pad
5.25 in
Lifting Time
45 seconds

Outside Dimensions

E Height
95.75 in
F Width
109 - 139 in

Inside Dimensions

H Inside Columns
95.5 - 125.5 in
I Drive-Thru Clearance
70.75 - 100.75 in

Arms and Pads

K Front Arm Reach Min
26.5 in
K Front Arm Reach Max
41.25 in
L Rear Arm Reach Min
26.5 in
L Rear Arm Reach Max
41.25 in
Screw Pad Adjustment
1.5 in

Power Unit and Voltage

Horsepower
2 HP
Voltage
110V / 50/60 Hz / 1-Phase
Sound Level
60 dBA

Shipping and Delivery

Shipping Dimensions
35 x 68 x 39 in
Shipping Weight
980 lb
Shipping Method
LTL
Offload Requirement
Liftgate

Features

  • •BendPak ASARS™ uses 360° holding grip and automatically restrains the swing arms as the lift rises, helping prevent unintended arm movement during service.
  • •An additional 3 inches of lift height over the previous M7K create more room to work beneath the vehicle.
  • •Tall adapters and frame cradle pads expand setup options for compatible vehicle lifting points.
  • •Included rolling work seat provides mobile seated support for service around the vehicle.
  • •Supreme Package oil drain adds a dedicated way to collect used oil during maintenance.
  • •New standard equipment: four telescoping screw pad adapters with 35 mm pins and 1.5 inches of lift-pad height adjustment.
  • •7,000-lb. rated lifting capacity, limited to 3,500 lbs. per axle and 1,750 lbs. on each arm.
  • •50.25-inch maximum lifting height, measured with the pad adjusted high and one stackable adapter.
  • •Telescoping arms adjust from 26.5 to 41.25 inches between the arm pivot and lift-pad center.
  • •Base-plate spacing can be configured from 105 to 135 inches for the installation.
  • •Seven separate lift-height safety lock positions support a choice of service heights.
  • •Hydraulically equalized lifting synchronizes movement between the two sides of the lift.
  • •Floor-bolted columns can be removed and rolled aside when the service bay needs to serve another purpose.
  • •Recessed drop-in floor anchors retain the mounting locations after column removal; a mobile cart supports the power unit and flow divider.
  • •Approximately 45 seconds to full rise, with actual lifting and lowering times dependent on vehicle weight.
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak.

User Manual

Downloads

Sales Sheet

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.