Skip to content

Instant Rebate Savings 0% Financing • Ends Sept 30

SHOP NOW
GO BACK
QuickJack Brand Logo

QuickJack 6000ELX Super-Long Portable Car Lift - 6,000-lbs. Capacity

SEE REVIEWS
IN STOCKSKU 5175650
$2,325.00
QuickJack 6000ELX super-long frame portable lift for 6,000-lb. capacity vehicle lifting.
Product 3D model preview
QuickJack 6000ELX portable EV lift designed for long-wheelbase vehicle service.
QuickJack 6000ELX portable car lift feature graphic for super-long frame lifting.
QuickJack 6000ELX portable car lift with super-long frames for extended-wheelbase vehicles.
Product 6
QuickJack 6000ELX portable car lift quick-connect fittings for electric vehicle lifting.
Product 8
QuickJack 6000ELX 110V portable car lift frames for extended wheelbase vehicles
QuickJack 6000ELX super-long frame portable lift for 6,000-lb. capacity vehicle lifting.
1
Ask An Expert

Expected to Ship: Aug 25, 2026

SALES FLYERMANUALWARRANTY

QuickJack 6000ELX Super-Long Portable Car Lift - 6,000-lbs. Capacity
$2,325.00

Super-Long QuickJack Reach for EVs That Refuse to Fit the Usual Lift

The QuickJack 6000ELX Super-Long Portable Car Lift is built for the vehicles that pushed ordinary portable lifts to their limit. With a 6,000-lb. capacity, 24.5-inch lifting height, and 86.75-inch frame length, the 6000ELX gives long-wheelbase EVs, luxury electric sedans, and vehicles with extreme lift point spreads a real QuickJack solution without requiring a full-size two-post or four-post lift. This is the only QuickJack model in the ELX series, and that is the point. It exists for the small but important group of vehicles that fall outside the normal TL and TLX lift point range. If the lift points sit far out toward the edges of the chassis, the 6000ELX gives shops, detailers, and serious garages the extra reach needed to lift with confidence.

Built for Long-Wheelbase Electric Vehicle Lift Points

EVs are often heavier than similar gas-powered vehicles, and many place their manufacturer-recommended lift points farther apart than conventional portable lifts can reach. The 6000ELX was designed around those long lift point spreads so technicians and enthusiasts can service modern electric vehicles without forcing the wrong lift into the job. QuickJack’s cantilevered frame design helps the frames rise without rubbing against the vehicle tires, even when working with long wheelbases. That makes the 6000ELX a smart choice for contemporary EV cars, luxury electric vehicles, and other 6,000-lb. and under vehicles that need more reach than a standard portable car lift can provide.
Built for Long-Wheelbase Electric Vehicle Lift Points
Open-Center EV Service Without the Permanent Lift Footprint

Open-Center EV Service Without the Permanent Lift Footprint

The 6000ELX keeps the open-center access that makes QuickJack so useful for undercar work, detailing, inspections, tire service, brake work, and general maintenance. You get access beneath the vehicle without parking a permanent lift in the middle of the bay or giving up valuable garage space. For smaller shops, private garages, and detailers that cannot fit a full-size lift, the 6000ELX fills a real gap. It brings super-long portable lift capability to vehicles that otherwise might require larger fixed equipment, helping more users work on long-wheelbase EVs in practical spaces.

Premium QuickJack Safety with Portable Setup Convenience

Like the rest of the premium QuickJack lineup, the 6000ELX uses automatic safety locks and a portable frame system that can be positioned when needed and stored when the job is done. The result is a serious EV-capable portable car lift that still fits the QuickJack way of working. The 6000ELX is not trying to be every lift for every vehicle. It is the specialized long-reach QuickJack for users who need to lift electric vehicles and other long-wheelbase cars the right way, with frame-engaging support, open-center access, and the mobility that made QuickJack famous.
Premium QuickJack Safety with Portable Setup Convenience

Super-Long Frame Reach

The 86.75-inch frame length helps reach lift points on long-wheelbase EVs and luxury electric vehicles that standard portable lifts may not fit.

6,000-lb. EV Capacity

Built with a 6,000-lb. capacity to handle many modern electric sedans and long-wheelbase vehicles with heavier curb weights.

24.5-Inch Lift Height

Raises vehicles up to 24.5 inches for brake work, tire service, inspections, detailing, and undercar maintenance.

Cantilevered Frame Design

QuickJack’s frame geometry is designed to rise without rubbing against vehicle tires during the lift cycle.

Open-Center Access

Independent frames leave the center of the vehicle open for underbody access without the footprint of a permanent lift.

Purpose-Built ELX Model

The 6000ELX is the dedicated long-reach model for vehicles that fall outside the typical TL and TLX lift point range.

Specifications

Capacity

Lifting Capacity
6000 lb

Rise

A Lowered Height with 2 Inch Block
3.5 in
B Lifting Height with 2 Inch Block
21 in
C Lifting Height with 3 Inch Block
22 in
D Max Lifting Height
22 in
E Lift Height with Adapters
24 in
F Lift Height with Adapters and Pin
26.75 in
Lifting Time
30 seconds

Lift Point Spread

G Min Lift Point Spread
53 in
H Max Lift Point Spread
76 in

Frame Dimensions

I Frame Width Each
12.5 in
J Frame Length Each
86.75 in
Frame Weight Each
112 lb

Power Unit and Voltage

Horsepower
2 HP

Shipping and Delivery

Shipping Method
LTL
Offload Requirement
Liftgate
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak at [email protected]

CALIFORNIA PROP 65

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.