Skip to content

Instant Rebate Savings 0% Financing • Ends Sept 30

SHOP NOW
GO BACK
BendPak Brand Logo

BendPak PCL-18B-2 Mobile Column Lifts - Set of 2

SEE REVIEWS
IN STOCKSKU 5175291
$31,495.00
Financing as low as $662/moApply now

Flexible business financing available through Navitas.

BendPak PCL-18B ALI Certified mobile columns configured for 36,000-lb. heavy-duty lifting capacity.
Product 3D model preview
Front arms on the BendPak PCL-18B commercial mobile column lift for heavy-duty vehicle lifting.
BendPak PCL-18B mobile column lift arm showing multiple width adjustment positions.
Technician adjusting the wheel-engaging carriage forks on a BendPak PCL-18B mobile column lift.
BendPak PCL-18B commercial mobile column lift arm with manual locking mechanism detail.
Front caster wheel assembly on the BendPak PCL-18B heavy-duty mobile column lift.
Heavy-duty caster wheels on the BendPak PCL-18B mobile column lift for shop maneuverability.
Product 9
High-voltage horseshoe wiring plug detail for the BendPak PCL-18B mobile column lift system.
1
Ask An Expert

Expected to Ship: Sep 1, 2026

SALES FLYERMANUALWARRANTY

BendPak PCL-18B-2 Mobile Column Lifts - Set of 2
$31,495.00
Add Two PCL-18B Mobile Column Lifts and Think Bigger

Add Two PCL-18B Mobile Column Lifts and Think Bigger

The BendPak PCL-18B-2 Mobile Column Lift Set is built for shops that already use PCL-18B columns and want to expand into larger heavy-duty lifting configurations. Each column carries an 18,000-lb. individual capacity, giving fleet shops, truck facilities, municipal garages, and commercial service operations a practical way to grow their lifting system without replacing the equipment they already trust. This set of two is an expansion package, not a standalone vehicle lift. A minimum of four mobile column lifts must be used to raise a vehicle, and heavier vehicles may require six-column or eight-column setups. Do not attempt to lift only the front or rear of a vehicle with two columns. Vehicles must be raised on an even plane at all times.
Expand Into Six-Column and Eight-Column Lifting

Expand Into Six-Column and Eight-Column Lifting

The PCL-18B-2 gives shops a direct path to scale their mobile column lift fleet as service demands increase. Add a pair to an existing four-column setup to move into six-column lifting, or continue expanding for larger multi-column configurations used with longer, heavier commercial vehicles. That flexibility is valuable for operations that service different vehicle classes throughout the week. Instead of locking your shop into a single fixed bay, mobile columns let you adapt your lifting layout around the vehicle, the job, and the floor space available that day.

Smart Controls Keep Every Column in Sync

PCL-18B mobile columns are designed for coordinated lifting with controls that can be programmed and operated from any column. Smart electronics include self-diagnostics and self-calibration functions, while sealed and enclosed linear potentiometers deliver precise synchronization and communication between columns during lift cycles. The system also supports SINGLE, PAIR, or TEAM operation, giving trained operators more control over how columns are managed during setup and service. Variable height limit settings help shops work around low ceilings or specific service-height requirements.
Smart Controls Keep Every Column in Sync
Heavy-Duty Mobility with Safety Built Into Each Column

Heavy-Duty Mobility with Safety Built Into Each Column

Each PCL-18B column is engineered for real shop movement, with pallet-jack style steering wheels, tandem 8-inch polyurethane-covered steel wheels, sealed roller bearings, extended forks, and multi-width wheel forks with locking pins. Low-mounted power units and cylinders help lower the center of gravity, making the columns easier to maneuver and less likely to feel top-heavy during positioning. Safety systems are built into every column, including 24-volt safety circuitry, warning lights, audible alarms, emergency shut-off switches, automatic independent locks spaced every four inches, and inverted hydraulic cylinders with integrated safety valves. Manual safety override valves also allow lowering in the event of a power outage.
Expansion Pair

Expansion Pair

Add two PCL-18B columns to an existing mobile column lift fleet when your shop is ready to move beyond four-column lifting.
18,000-lb. Per Column

18,000-lb. Per Column

Each column provides 18,000 lbs. of lifting capacity, allowing larger configurations to handle serious commercial vehicle service.
Not a Standalone Lift

Not a Standalone Lift

This two-column set is intended for expansion only. A minimum of four columns is required to lift a vehicle safely.
Any-Column Controls

Any-Column Controls

Program and control the system from any column, with smart electronics helping keep synchronized lift operation precise.
Easy Column Positioning

Easy Column Positioning

Pallet-jack style steering, polyurethane-covered steel wheels, and a tight turning radius help operators position columns around large vehicles.
Column-Level Safety

Column-Level Safety

Each column includes warning alerts, emergency shut-off, safety circuitry, and automatic locks for confident heavy-duty service.

Specifications

Specification Diagram 1
Specification Diagram 2

Capacity

Lifting Capacity
18000 lb
System Lifting Capacity
36000 lb

Rise

B Max Lifting Height
71.5 in
C Lifting Time
85 seconds

Dimensions

D Height
101 in
E Width
45 in
F Depth
48.75 in
G Chassis Length
32.25 in

Lifting Fork

H Lifting Fork Width
9.5 - 35 in
I Lifting Fork Length
11.5 in

Power Unit and Voltage

Voltage
208-230V / 60 Hz / 3-Phase

Shipping and Delivery

Shipping Dimensions
54 x 48 x 107 in
Shipping Weight
1496 lb
Shipping Method
Flatbed
Offload Requirement
Forklift
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak at [email protected]

CALIFORNIA PROP 65

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.