Skip to content

Instant Rebate Savings 0% Financing • Ends Sept 30

SHOP NOW
GO BACK
BendPak Brand Logo

BendPak HD-9SW Four-Post Lift - 9,000-lbs. Capacity

SEE REVIEWS
IN STOCKSKU 5175023
$11,495.00
Financing as low as $242/moApply now

Flexible business financing available through Navitas.

BendPak HD-9SW dual-platform super-wide four-post lift with 9,000-lb. capacity.
Product 3D model preview
Product 3
BendPak HD-9SWX dual-platform lift supporting vehicles in a residential garage.
Product 5
Product 6
Product 7
BendPak HD-9SW dual-platform super-wide lift in a home garage storage application.
BendPak HD-9SW 9,000-lb. four-post lift for wide vehicle parking and maintenance
BendPak HD-9SWX 9,000-lb. four-post lift for longer vehicles and garage storage
1
Ask An Expert

Expected to Ship: Aug 21, 2026

SALES FLYERMANUALWARRANTY

Four-Post Lift / 9,000-lbs. Capacity / Dual Platform

BendPak HD-9SW Four-Post Lift - 9,000-lbs. Capacity
$11,495.00
Four-Car Parking Without the Garage Tetris

Four-Car Parking Without the Garage Tetris

The BendPak HD-9SW Four-Post Lift is built for one of the biggest garage problems there is: not enough protected parking. With its super-wide dual-platform layout, this 9,000-lb. four-post lift lets users park up to four vehicles in the space that would normally hold two, making it a serious upgrade for collectors, homeowners, and shops that need more indoor storage without adding more building. This is not just a parking-only stacker. The HD-9SW uses open-center runways, adjustable inside runway positioning, and accessory-ready rails so it can support vehicle storage, maintenance, and service work. For garages where daily drivers, weekend cars, trucks, and projects are all fighting for space, the HD-9SW turns a crowded floor plan into a much smarter four-post lift setup.
Super-Wide Dual Platform Design for Parking and Service

Super-Wide Dual Platform Design for Parking and Service

The HD-9SW is designed around a double-wide four-post lift configuration with four runways and 192-inch post-to-post clearance. That extra width gives users room to park two vehicles across the top platform while still preserving useful space below for additional vehicles or shop workflow. Shorter runways make the HD-9SW a strong fit for smaller spaces compared with extended-length double-wide models, while the inside runways adjust for different tread widths. This gives users more flexibility when loading different cars, trucks, and SUVs onto the lift.

Cable, Sheave, and Hydraulic Systems Built for BendPak Durability

BendPak equips the HD-9SW with an electric-hydraulic power system, a single hydraulic cylinder mounted underneath the runway, and fully enclosed lifting cables, safety locks, and sheaves. Dual-hub cable sheaves help reduce friction on the cables, while oversized sheave diameter helps reduce cable fatigue during repeated lifting cycles. Heavy-duty 3/8-inch aircraft cable, oversized self-lubricating cable rollers, rugged 1.25-inch roller axles, and internal anti-sway slider blocks all support smooth, steady platform movement. The result is a double-wide four-post lift that feels purpose-built for regular parking, storage, and service use.
Cable, Sheave, and Hydraulic Systems Built for BendPak Durability
Safety Locks, Accessories, and Real Garage Flexibility

Safety Locks, Accessories, and Real Garage Flexibility

The HD-9SW includes multi-position safety locks in each column, adjustable lock ladders, push-button pneumatic safety release, and independent backup slack-cable safety latches. Removable approach ramps add drive-under clearance, and the durable matte runway finish supports daily use in serious garages and shop environments. Optional drive-thru ramps, drip trays, solid decks, and 4,500-lb. air-hydraulic rolling bridge jacks help users configure the lift around the way they actually work. The HD-9SW is built to park more, store smarter, and keep service capability within reach.
Double-Wide Parking

Double-Wide Parking

The HD-9SW is designed to park up to four vehicles in a dual-platform four-post lift layout. It helps turn a two-car footprint into a more useful storage zone.
192-Inch Post Clearance

192-Inch Post Clearance

Wide post-to-post clearance gives users room to load vehicles across the lift while preserving practical access around the platforms.
Adjustable Inside Runways

Adjustable Inside Runways

The inside runways adjust for different tread widths, helping the HD-9SW accommodate a wider range of vehicle combinations.
Open-Center Runways

Open-Center Runways

Open-center platforms let the HD-9SW function as more than a storage lift, adding maintenance and service access when needed.
Pneumatic Safety Release

Pneumatic Safety Release

A push-button pneumatic release works with multi-position locks to make lowering more controlled and convenient.
Accessory-Ready Rails

Accessory-Ready Rails

Runway rails support optional accessories such as drip trays, solid decks, drive-thru ramps, and rolling bridge jacks.

Specifications

Capacity

Lifting Capacity
9000 lb

Rise

A Min Runway Height
7 in
B Max Rise
70 in
C Max Lifting Height
77 in

Outside Dimensions

D Width
202 in
E Outside Length
174 in
F Overall Length
218.5 in
G Height
90 in

Inside Dimensions

H Inside Columns
192 in
I Drive-Thru Clearance
81 in

Runways

J Runway Width
19 in
K Runway Length
164 in
L Width Between Runways
34.25 - 41 in
M Runway Centerline
56.25 - 62.75 in
N Outside Edge of Runways
75.25 - 81.75 in

Minimum Wheelbase

Rated Wheelbase Capacity
115 in
25% Capacity
70 in
50% Capacity
85 in
75% Capacity
100 in

Locking

Locking Positions
14
Locking Spacing
4 in

Power Unit and Voltage

Horsepower
2 HP
Voltage
208-230V / 60 Hz / 1-Phase
Sound Level
45 dB

Shipping and Delivery

Shipping Dimensions
22 x 200 x 52 in
Shipping Weight
2796 lb
Shipping Method
Flatbed
Offload Requirement
Forklift
Permits, Codes & Certification Disclaimer

Product requirements vary by location. Unless expressly stated on the applicable product page or in an official BendPak publication, BendPak does not represent or warrant that any BendPak or Ranger product complies with the permits, licenses, building codes, seismic requirements, certifications, standards, laws or regulations applicable to the buyer’s location or intended use.

The buyer is solely responsible for determining and obtaining all approvals required for the purchase, installation and operation of the product, including permits, licenses, inspections and structural, electrical, seismic or building-code compliance. BendPak is not responsible for related costs, modifications, delays, fines, penalties, liens or other charges imposed by any governmental authority, agency, utility, property owner or other third party.

Not all BendPak lift models are ALI Certified or meet the applicable requirements of ANSI/ALI ALCTV and ANSI/UL 201. Current certification information is available through the Automotive Lift Institute’s Directory of Certified Lifts at autolift.org or by contacting BendPak at [email protected]

CALIFORNIA PROP 65

User Manual

Downloads

Sales Sheet

Downloads

Warranty

Downloads
CONTACT US

Let’s Find the Right Equipment

Not sure which product best fits your shop, workspace, or application? Our equipment specialists can answer your questions, compare options, and help you choose with confidence.