QuickJack 7000TLX Extended Portable Car Lift (7000TLX)

Starting at $1850

Save $
Buy Now
QuickJack 7000TLX Extended Portable Car Lift
User Manual Download
Sales Sheet Download
Warranty Download
BendPak Financing Credit Card

Lift Now,
Pay Over Time

with the Synchrony Car Care™ Credit Card.

Convenient monthly payments make your equipment purchase simple.

Learn More

7000TLX Extended-Length Portable Car Lift

The 7,000-lb. capacity 700TLX is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Until the 7000TLX , only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66" lift point reach on the 7000TLX allows operator access to more trucks and SUVs than ever before.

Despite the longer, beefier construction, the 7000TLX car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience.

Like our lower-capacity portable car lifts (the 3500SLX, 5000TL and 7000TL), built-in durable urethane wheels mean the 7000TLX frames can be rolled around, indoors or outdoors, at your convenience. This is our heaviest model, but no bolts are required, and no special wiring is ever necessary.

The 76" frames are longer than our TL models (the same length as the 5000TLX), but they’re still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it’s seconds to get from stow-to-go.

With a collapsed profile just over 3.5", the 7000TLX needs no extra support crossbeams. It’s the perfect car lift for shops with little space to spare and big vehicles to service.

Extended-length car lift design

The 7000TLX portable car lift has been redesigned to accommodate heavy, high-clearance vehicles with long wheelbases. We’ve increased the overall frame length and lift point spread by 6”. This means the minimum lift point spread is now 6” longer, so smaller vehicles may not fit with the 7000TLX.

TL minimum lift point spread: 37"
TLX minimum lift point spread: 43"

TL maximum lift point spread: 60"
TLX maximum lift point spread: 66"

TL overall frame length: 70"
TLX overall frame length: 76"

What's the difference between the NEW TL Models vs. SLX Models?

The biggest difference between the 7000TLX and BL-7000EXT is the lifting height, which has increased 3 inches. This provides ample room to perform all the common vehicle maintenance tasks and allows you the capability to perform even the most complicated repairs.

Overall dimensions have remained the same, so you'll continue to benefit from what made QuickJack so popular in the automotive community and that is it's super-low 3" lowered height. The minimum lifting point spread did change from 31.5" to 37", but this will not make a difference to the vast majority of 7000TLX users. 

Features & Specs

QuickJack 7000TLX Extended Portable Car Lift specs diagram

Automatic safety locks

Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.

Increased lifting height

QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.

One-handed operation

By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.

Lifting capacity
7,000 lbs. (2,268 kg)
(A) Lowered
A - Frame only: 3.5" (89 mm)
(B) Lowered w/ Small Block
B - With 2" block: 4" (102 mm)
(D) Raised (Small Block)
D - With 2" block: 21.5" (546 mm)
(E) Raised (Large Block)
E - With 3" block: 22.5" (572 mm)
(F) Raised (Stacked Blocks)
F - Max. height: 24.5" (622 mm)
(G) SUV Adapters
G - With adapters: 24.25" (610 mm)
(H) SUV Adapters (w/ Pin)
H - With adapters + pin: 27" (686 mm)
(I) Lifting Point Spread - Max
I - Maximum: 66" (1,676 mm)
(J) Lifting Point Spread - Min
J - Minimum: 43" (1,092 mm)
(K) Frame Width
K - Width: 12.5" (318 mm)
(L) Frame Length
L - Length: 76" (1,930 mm)
Frame Weight
98 lbs. (45 kg)
Power Unit Weight
15 lbs. (7 kg)
Time to full rise:
30 seconds
Shipping Weight
304 lbs. (138 kg)
Shipping dimensions (ea. frame):
73.75" (L) x 16.75" (W) x 6.25" (H) (1,872 mm x 425 mm x 155 mm)
The QuickJack 7000TLX Extended Portable Car Lift is an ALI Certified Car Lift

WARNING: California Prop 65

QuickJack 7000TLX Extended Portable Car Lift Reviews

Interested in the QuickJack 7000TLX Extended Portable Car Lift?