RS-750 Truck Spray Wash Cabinet with Skimmer
Ranger RS-750 heavy-duty professional spray wash cabinet
When you've got something big and dirty, clean it better with Ranger. This powerfully versatile, 53-gallon capacity spray wash cabinet degreases even your filthiest car parts in no time flat. Comes with free bucket of soap.

    Learn more about Deep Clean parts washer technologyIf your service garage handles a lot of larger vehicles, then this extra large capacity spray wash cabinet was designed just for you and your customers. With an inside compartment height of 54", it can handle anything from engine parts to tractor parts. Each RS-750 is equipped with a large, 30" diameter turntable that can carry a payload up to 1,000 lbs. Like all Ranger spray-wash cabinets, the RS-750 is built to last. We constructed this cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and powder coat finish. Durable construction combined with simple operating controls, brass nozzles, a gasket-free door and a large, 70-gpm pump make the RS-750 tough enough to take on the heaviest, dirtiest auto parts you can find.

    Movable filter basket
    Each component washer cabinet by Ranger includes a robust trap filter to secure large particles greater than 1/8". Filter basket is removable for unfettered access to the cleansing solution tank and easy maintenance.
    Removable filter basket 
    Multi-directional sprayers
    Industrial-strength multi-directional spray jets are located below, above and on the sides to wash away set-in grime.
     Ranger spray wash cabinet spray jets
    Steel oil skimming system
    Parts washers by Ranger include a stainless-steel oil skimmer that miraculously separates oil and grime from the water to increase the viable longevity of the detergent solution cleanser. Oil and other contaminants are directed via downspout into holding containers.
     Oil skimmer

    Fast-release latch / gasket-free door
    Swift-release door latch is built-in for technician convenience. The gasket-free interlocking door keeps the cleanser material free from contaminants in the tank instead of on your floor.

     spray wash door latch
    Brass nozzles
    Instead of pipe-tree and drilled holes, Ranger parts washers include replaceable spray nozzles made of brass. These sprayer nozzles have a sharply articulated spray grid to give users a high-quality cleaning experience and great performance free from corrosion.
     Brass nozzles

    Durable turntable
    The system behind the parts washer turn table is friction-drive, helping to eliminate potential motor damage by reducing the risk of component jamming inside the cabinet.

     Spray wash turn table

    Industrial casters and convenient tank drain.
    Heavy-duty rubber swivel casters provide sensible maneuverability. Ranger components washers include built-in pipe drains to eliminate sludge from the floor of the parts washer tank.

     Heavy-duty casters

    Safety switch and timer dial
    A door switch turns off the washing cycle when the door is opened, while a variable 60-minute timer allows for different wash cycle times to be set manually.

     Convenient timer and safety door switch

    Removable tree rack and components basket
    The quick-mount parts tree rack and hanging component parts basket is ideal for the cleaning of smaller components. Use the parts tree and basket in conjunction with parts on the turntable and you’ll tackle more parts cleaning in less time. The center tree rack can be easily removed to provide additional clearance.

     Removable tree rack and parts basket
    Extra accessories come standard
    All Ranger parts washers come with a removable parts rack, small parts basket and 25 pounds of detergent.
     Spray wash accessory package

    Commercial-grade pump / motor combination
    Every Ranger parts washer features a centrifugal pump specifically engineered for parts washing applications. The motor and pump are located at the rear of the cabinet and shrouded by a protective cover to prevent contamination.

     Commercial-grade pump

    Hot cleaning
    Fast heating is accomplished via a nickel based, alloy-sheathed, heater element specifically designed for heated parts washing applications.

     Nickel based alloy-sheathed heater element

    Adjustable set point thermostat features a heating range up to 175 Degrees Fahrenheit.

     Ranger spray wash thermostate

    Double-pole circuit breaker
    The Eaton Cutler-Hammer 20/30 amp Quadplex Double-Pole Type BR Circuit Breaker features a 2-pole 20 amp breaker for the heater and a separate 2-pole 30 amp breaker for the motor and pump combination.  

     Double-pole circuit breaker for spray wash cabinets
    Aluma-Klean soap removes oil, stains and grease with ease
    Ranger’s Aluma-Klean spray-wash detergent is a mild parts cleaning soap designed to clean aluminum, stainless and other delicate parts without whitening the surface. Aluma-Klean parts cleaning soap is not a solvent, but rather a non-foaming, low pH, mild-alkali, water-soluble, powdered detergent especially formulated for high pressure heated parts washing systems. Incredible cleaning action removes grease, oil, baked on stains, carbon, protein and even some paints.
     Aluma-Klean oil removal soap
    • Heavy-duty steel construction
    • Removable tank screen
    • Stainless oil skimmer
    • Removable parts tree
    • Powder coat finish
    • Brass nozzles
    • Full opening octagonal door
    • Large drain pipe
    • Heavy-duty rubber casters
    • Friction-drive turntable system
    • Gasket-free door
    • Small parts basket
    • Stainless steel handles
    • Removable parts tree
    • Free bucket of soap included

    • Overall height: 78" / 1,981 mm
    • Inside height: 54" / 1,372 mm
    • Inside width: 32" / 813 mm
    • Turntable diameter: 30" / 762 mm
    • Tank capacity: 53 gallons
    • Recommended floor space: 44" x 43" / 1,118 mm x 1,092 mm
    • Load capacity: 1,000 lbs. / 454 kg
    • Cycle Timer: 0 - 60 minutes
    • Brass Nozzles: 22
    • Steel construction: 12 Gauge / .109 thickness
    • Pump output: 70 psi @ 70 gpm
    • Motor: 1 Hp / 220 VAC / 60 Hz / 1 Ph
    • Electric heater: 6 kW
    • Water Temperature: 175° F
    • Shipping weight: 960 lbs. / 435 kg
    • Shipping dimensions: 36" x 44" x 68" / 914 mm x 1,118 mm x 1,727 mm
    Ranger RS-750 heavy-duty professional spray wash cabinet
    Ranger RS-750 heavy-duty professional spray wash cabinet
    RS-750 heavy-duty parts washer
    RS-750 skimmer wheel
    RS-750 parts washer cabinet door latch
    RS-750 wash cabinet parts tray
    RS-750 parts washing cabinet with parts tray
    RS-750 parts cabinet washer thermal timer

    Featured accessories for the RS-750

         Call Us Toll Free:


    Request More Info on the RS-750!

    Quick Specs

    Load capacity: 1,000 lbs.
    Height: 78"
    Inside height: 54"
    Inside width: 32"
    Turntable diameter: 30"
    Tank capacity: 53 gal.
    Cycle Timer: 0 - 60 min.
    Shipping weight: 960 lbs.
    View Full Specs »
    ©2016 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk