If your service garage handles a lot of larger vehicles, then this extra large capacity spray wash cabinet was designed just for you and your customers. With an inside compartment height of 54", it can handle anything from engine parts to tractor parts. Each RS-750 is equipped with a large, 30" diameter turntable that can carry a payload up to 1,000 lbs. Like all Ranger spray-wash cabinets, the RS-750 is built to last. We constructed this cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and powder coat finish. Durable construction combined with simple operating controls, brass nozzles, a gasket-free door and a large, 70-gpm pump make the RS-750 tough enough to take on the heaviest, dirtiest auto parts you can find.
|Movable filter basket
Each component washer cabinet by Ranger includes a robust trap filter to secure large particles greater than 1/8". Filter basket is removable for unfettered access to the cleansing solution tank and easy maintenance.
Industrial-strength multi-directional spray jets are located below, above and on the sides to wash away set-in grime.
|Steel oil skimming system
Parts washers by Ranger include a stainless-steel oil skimmer that miraculously separates oil and grime from the water to increase the viable longevity of the detergent solution cleanser. Oil and other contaminants are directed via downspout into holding containers.
Fast-release latch / gasket-free door
Instead of pipe-tree and drilled holes, Ranger parts washers include replaceable spray nozzles made of brass. These sprayer nozzles have a sharply articulated spray grid to give users a high-quality cleaning experience and great performance free from corrosion.
Industrial casters and convenient tank drain.
Safety switch and timer dial
Removable tree rack and components basket
|Extra accessories come standard
All Ranger parts washers come with a removable parts rack, small parts basket and 25 pounds of detergent.
Commercial-grade pump / motor combination
Double-pole circuit breaker
|Aluma-Klean soap removes oil, stains and grease with ease
Ranger’s Aluma-Klean spray-wash detergent is a mild parts cleaning soap designed to clean aluminum, stainless and other delicate parts without whitening the surface. Aluma-Klean parts cleaning soap is not a solvent, but rather a non-foaming, low pH, mild-alkali, water-soluble, powdered detergent especially formulated for high pressure heated parts washing systems. Incredible cleaning action removes grease, oil, baked on stains, carbon, protein and even some paints.
- Heavy-duty steel construction
- Removable tank screen
- Stainless oil skimmer
- Removable parts tree
- Powder coat finish
- Brass nozzles
- Full opening octagonal door
- Large drain pipe
- Heavy-duty rubber casters
- Friction-drive turntable system
- Gasket-free door
- Small parts basket
- Stainless steel handles
- Removable parts tree
- Free bucket of soap included
- Overall height: 78" / 1,981 mm
- Inside height: 54" / 1,372 mm
- Inside width: 32" / 813 mm
- Turntable diameter: 30" / 762 mm
- Tank capacity: 53 gallons
- Recommended floor space: 44" x 43" / 1,118 mm x 1,092 mm
- Load capacity: 1,000 lbs. / 454 kg
- Cycle Timer: 0 - 60 minutes
- Brass Nozzles: 22
- Steel construction: 12 Gauge / .109 thickness
- Pump output: 70 psi @ 70 gpm
- Motor: 1 Hp / 220 VAC / 60 Hz / 1 Ph
- Electric heater: 6 kW
- Water Temperature: 135° - 175° F
- Shipping weight: 960 lbs. / 435 kg
- Shipping dimensions: 36" x 44" x 68" / 914 mm x 1,118 mm x 1,727 mm
Featured accessories for the RS-750
|Load capacity:||1,000 lbs.|
|Tank capacity:||53 gal.|
|Cycle Timer:||0 - 60 min.|
|Shipping weight:||960 lbs.|
Support Get Support For This Product » Download The Instruction Manual »