• Professional Spray Wash Cabinet with Skimmer
    • Truck Spray Wash Cabinet with Skimmer
    • 20-lb. Aluma-Klean Soap Bucket
    • 50-lb. Aluma-Klean Soap Bucket

    Aqueous Parts Washer and Auto Parts Spray-Wash Cabinets Clean Parts with Soap and Water

    Only Ranger delivers deep-down auto parts cleaning with a solid line of heated aqueous spray parts washers designed for durability and precision under the most demanding conditions. Let’s face it; people in our line of work aren’t generally too concerned about a little dirt, but when it comes to grimy parts in desperate need of cleaning, that’s precisely where we at Ranger shine.

    Parts Washer Technology

     

    Washing parts has never been so easy
    1. Load those filthy parts on the over-sized turntable or place them on the sturdy parts tree or hanging parts basket.
    2. Close and latch the door then set the wash-cycle timer for up to 60-minutes.
    3. As the turntable rotates at 3-RPM, the parts are blasted from all angles with hot soap and water. The solution is continuously filtered and recycled.
    4. The powerful force of the jets and the hot detergent combine to remove grease, oil, carbon and other grime in just minutes.
    5. Unload the clean parts and allow them to flash dry in seconds.

    RS-750-Spray-Wash-Cabinet.pngEach of our best-in-class industrial parts washers and parts cleaning systems are designed to hold payloads of 500 to 1,000 pounds which means they’ll tackle big stuff like complete transmissions, engine blocks and more with ease. But we’d never stop there. A Ranger parts washer boasts more convenient features than any other industrial spray cabinet on the market today. Where others might consider these details to be luxury extras, at Ranger we know that they are essential to hard-working professionals like you. That’s why each Ranger parts washer cabinet comes with a heavy-duty turntable, high-quality replaceable brass nozzles, an automatic timer, safety door switch, heavy-duty parts cleaning basket, a removable tree rack, tank drain, heavy-duty casters, multi-directional spray jets and a built-in oil skimming system. On top of that, we even throw in a 25-gallon bucket of Aluma-Klean premium parts cleaning detergent absolutely free. While we take a little grease as a point of pride, your clients will certainly appreciate the immaculate cleaning results brought to them exclusively by a Ranger parts washer spray system.


     

    Browse and compare these Parts Washers by Ranger and soap options with the handy slider at top of the page, or click on another product section using the navigation bar to see something completely different.

      Capacity Tank capacity Interior height Interior width
     RS-500 500 lbs. 50 gal. 32" 43"
     RS-750 1,000 lbs. 53 gal. 54" 32"
    Removable filter basket
    Every Ranger parts washer features a large filter traps to trap oversize particles greater than 1/8”. It lifts out for easy cleaning and provides open access to the cleaning solution tank.
    Removable filter basket 
    Multi-directional spray jets
    High-power multi-directional spray wash jets are positioned above, below and on the side to easily remove, grease and grime.
     Ranger spray wash cabinet spray jets
    Built-in oil skimming system
    Ranger commercial parts washers feature a stainless-steel oil skimming disc that magically “lifts” oil and grime from the water to help keep your detergent solution cleaner and longer lasting. A downspout directs the oil and other sludge into holding containers.
     Oil skimmer

    Quick-release door latch / gasket-free door
    A quick-release door latch is used for operator convenience and a gasket free interlocking door keeps the parts cleaning solution in the tank instead of on your floor.

     spray wash door latch
    Brass nozzles
    Rather than just drilled holes in a pipe-tree, Ranger parts washing cabinets feature replaceable brass spray nozzles that have a sharply defined spray pattern and provide a high pressure cleaning and corrosion-free performance.
     Brass nozzles

    Heavy-duty turntable
    A friction-drive system for the parts washer turntable eliminates harm to the motor if parts get jammed or caught inside the cabinet.

     Spray wash turn table

    Tank drain and heavy-duty casters
    A built-in pipe drain is included to remove sludge from the bottom of the parts washer tank. Heavy-duty rubber swivel casters provide easy mobility.

     Heavy-duty casters

    Timer and safety door switch
    A built-in safety door switch shuts off the washing cycle when the door is opened and a variable 60-minute timer lets you set different wash cycle times automatically.

     Convenient timer and safety door switch

    Parts basket and removable tree rack
    The quick-mount parts tree rack and hanging parts basket is perfect for power cleaning smaller parts. Use the parts tree and basket in combination with parts on the turntable and you’ll tackle more parts cleaning in less time. The center tree rack can be easily removed to provide additional clearance.

     Removable tree rack and parts basket
    Standard accessory package
    All Ranger parts washers come standard with a removable parts rack, small parts basket and 25 pounds of detergent.
     Spray wash accessory package

    Commercial-grade pump / motor combination
    Every Ranger parts washer features an American made centrifugal pump specifically engineered for parts washing applications. The motor and pump are located at the rear of the cabinet and shrouded by a protective cover to prevent contamination.

     Commercial-grade pump

    Heated cleaning
    Quick heating is provided by a nickel based alloy- sheathed heater element specifically engineered for heated parts washing applications.

     Nickel based alloy-sheathed heater element

    Thermostat
    Adjustable set point thermostat features a heating range of 135 to 175 Degrees Fahrenheit.

     Ranger spray wash thermostate

    Double-pole circuit breaker
    The Eaton Cutler-Hammer 20/30 amp Quadplex Double-Pole Type BR Circuit Breaker features a 2-pole 20 amp breaker for the heater and a separate 2-pole 30 amp breaker for the motor and pump combination.  

     Double-pole circuit breaker for spray wash cabinets
    Aluma-Klean soap removes oil, stains and grease with ease
    Ranger’s Aluma-Klean spray-wash detergent is a mild parts cleaning soap designed to clean aluminum, stainless and other delicate parts without whitening the surface. Aluma-Klean parts cleaning soap is not a solvent, but rather a non-foaming, low pH, mild-alkali, water-soluble, powdered detergent especially formulated for high pressure heated parts washing systems. Incredible cleaning action removes grease, oil, baked on stains, carbon, protein and even some paints.
     Aluma-Klean oil removal soap


    Spray Wash Cabinet Model RS-500

    If your business demands complex cleaning, you can rely on Ranger spray-wash cabinets for maximum performance, durability and ease of use. The Ranger RS-500 essentially redefines spray-wash technology by featuring an octagonal, full-opening door that delivers more access allowing operators enhanced loading capabilities. The heavy-duty, all welded, 12-gauge steel cabinet is reinforced with stiffeners to handle heavier loads and eliminate flex and vibration for greater durability. The RS-500 features a durable powder coat finish, simple operator controls, brass nozzles, a large 70-gpm pump and a gasket-free door.

    All-around performance, durability and improved operator convenience helps make the RS-500 the definitive choice among professionals worldwide. Add up all of these features and you have a spray-wash system that can do more than clean parts, it can brighten your future.

    Specifications

    • Overall height:  66” - 1676mm
    • Inside height: 43” - 1092mm
    • Inside width: 32” - 813mm
    • Turntable diameter: 30” - 762mm
    • Tank capacity: 53 gallons
    • Load capacity: 500 lbs. - 227kg.
    • Cycle timer:  0-60 minutes
    • Pump output: 72 psi @ 70 GPM
    • Motor: 1-HP, 230VAC, 60hz, 1 phase
    • Electric heater: 6 kilowatts
    • Water temperature: 135°-175° Fahrenheit
    • Recommended floor space: 44” x 43” - 110mm x 108mm
    • Shipping weight:  610 lbs. / 277kg.

    Features

    • Spray nozzles: 18
    • Construction: 12 gauge welded steel
    • Large drain pipe
    • Heavy-duty rubber casters
    • Removable tank screen
    • Stainless oil skimmer
    • Friction-drive turntable system
    • Full-opening octagonal door
    • Interlocking gasket-free door
    • Small parts basket
    • Removable parts tree
    • Stainless-steel door handles
    • 25 pounds of Aluma-Klean detergent

    Parts Washer Model RS-750

    If your service garage handles a lot of larger vehicles, then this extra large capacity spray wash cabinet was designed just for you and your customers. With an inside compartment height of 54", it can handle anything from engine parts to tractor parts. Each RS-750 is equipped with a large, 30" diameter turntable that can carry a payload up to 1,000 lbs. Like all Ranger spray-wash cabinets, the RS-750 is built to last. We constructed this cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and polyurethane finish. Durable construction combined with simple operating controls, brass nozzles, a gasket-free door and a large, 70-gpm pump make the RS-750 tough enough to take on the heaviest, dirtiest auto parts you can find.

    Specifications

    • Overall height:  78” - 1981mm
    • Inside height: 54” - 1372mm
    • Inside width: 32” - 813mm
    • Turntable diameter: 30” - 762mm
    • Tank capacity: 53 gallons
    • Load capacity: 1000 lbs. - 454kg.
    • Cycle timer:  0-60 minutes
    • Pump output: 72 psi @ 70 GPM
    • Motor: 1-HP, 230VAC, 60hz, 1 phase
    • Electric heater: 6 kilowatts
    • Water temperature: 135°-175° Fahrenheit
    • Recommended floor space: 44” x 43” - 110mm x 108mm
    • Shipping weight: 960 lbs. / 435kg.

    Features

    • Spray nozzles: 22
    • Construction: 12 gauge welded steel
    • Large drain pipe
    • Heavy-duty rubber casters
    • Removable tank screen
    • Stainless oil skimmer
    • Friction-drive turntable system
    • Full-opening octagonal door
    • Interlocking gasket-free door
    • Small parts basket
    • Removable parts tree
    • Stainless-steel door handles
    • 25 pounds of Aluma-Klean detergent

     

         Call Us Toll Free:
    800-253-2363
    ©2012 BendPak, Inc. All rights reserved. Site Map | Policies | Feedback | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk