Description

Bend-Pak’s MCL-16 Heavy Duty Mobile Column Lift, is available in configurations of 4, or 6 columns with a total combined lifting capacity as high as 96,000-pounds. No other mobile lifting system matches the MCL-16 for safety, durability, flexibility, and ease-of-operation. Whether you need to lift a bus, fleet vehicle, or fire truck, there is an MCL-16 system designed to meet your needs. The MCL-16 system's controls are easy to use and feature up/down and emergency stop buttons. A precision, hardened, ball bearing screw-nut assembly suspended from the top of the column provides the lifting power. Don’t worry about service or maintenance issues because the expected life of our ball bearing screw-nut design is much greater than typical outdated, low-cost acme thread technology.

Shipping Details

It is the buyer's responsibility to unload the freight at their location. BendPak will take no responsibility for additional charges of any kind that may incur related to, or involved with, the renting or acquisition of equipment of any kind necessary to unload items off of a delivering carrier's truck. Contact your BendPak dealer for shipping details.

Features

• 16,000-pound column capacity.
• Available in configurations of 4 or 6 columns.
• Maximum system capacity is – 96,000 pounds.
• ALI / ETL certified.
• Integrated Electronic Self Diagnostics functions.
• Mobile power supply unit eliminates the need for a master column.
• Low-friction, re-circulating, ball-screw lifting system.
• Power consumption is just 1.5 KW per column.
• Fuse protected – only 16-amps for 4-columns.
• Space saving column design.
• Reduced column weight ( just 920-pounds each ) for easy mobility.
• Automatic synchronization and communication between columns
  for precise, level lifting.
• Simple operation.
• Automatic, independent safety lock devices ensure high level of safety.
• Manual emergency lowering controls.
• Quick-disconnect plugs at each column for fast and efficient set-up.
• Non-contact limit and safety switches.
• Long service life and simple maintenance.
• Three separate modes of operation.
• Integrated sensors for analyzing and detecting load nut wear and/or failure.
• Integrated sensors for analyzing and detecting motor phase failure.
• Shut-off device activates in the event load comes in contact with obstacle(s).
• Upper and lower limit stops.
• Operator Monitoring and automatic leveling control.
• Durable powder-coat finish.

Specifications

MCL-16-4
Maximum Lifting Capacity	Each Column 16,000 Lbs. / 7258 Kg.
Height	92-1/2" / 2350 mm.
Maximum Lifting Height	69" / 1753 mm.
Length Lifting Fork	12" / 305 mm.
Overall Length / Depth	43" / 1092 mm.
Width Lifting Fork	31-/12" / 800 mm.
Width Inside Frame	39" / 991 mm.
Overall Width	45-1/4" / 1150 mm.
Turning Circle	43" / 1093 mm./td>
Tire Size	12R-24.00 to 10.00-20.00/td>
Column Weight	Ea. 920 lbs. / 417 Kg.
Lifting Speed	105 Seconds/td>
Motor / 2 HP (*)	208/230 or 440/480V, 60 Hz, 3 Phase

* Special Voltages Available Upon Request.
The design, material and specifications are subject to change without notice.

Shipping Information

• Dimensions - N/A
• Shipping Weight - N/A

• MCL-16 Floorplan
• MCL-16 Manual

View ALI Service Bay Safety

Note: Manuals listed above are in relation to the most current model. Contact a BendPak technical representative to verify which manual is specific to your product model and/or version.

No Videos Found.