The XPR-9DS features double-telescoping screw pads with gouge and tear-resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63 mm stacking adapters included as standard accessories.
BendPak’s latest incarnation of XPR Two-Post Automotive Lifts offers a wide selection of durable, safe and reliable systems for virtually every lifting application. Specifically, the heavy-duty XPR-9DS Floor Plate Auto Lift is a swift lifter with a rich feature set designed to enhance productivity and efficiency, while reducing the need for maintenance and service. With lower operating costs and enhanced productivity, the BendPak XPR-9DS is the perfect two-post lifting solution for your shop or garage. Get ready to do more.
The XPR-9DS is precision, open-top style car lift with a maximum weight capacity of 9,000 lbs, and is CE approved and certified. Not only is it capable of raising some of your largest full-sized vans,
The “D” in XPR-9DS stands for the dual “direct-drive” low-pressure cylinders that minimize leakage and reduce the strain resulting from heavy workloads that would otherwise be placed on the entire hydraulic system. This exclusive BendPak design feature saves you maintenance costs throughout the life of your lift—you aren’t going to find user-focused convenience like this anywhere else.
Some other BendPak XPR Two-Post Lift Series innovations include: 16 individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 5” cable sheaves. And, to better cater to your specific automotive lifting needs, we offer similar model lifts with optional specialty arm configurations.
The entire series of XPR Two-Post Lifts is a perfect example of BendPak’s continuing commitment to producing automotive lifts of only the highest quality and utmost reliability. Featuring the most advanced engineered technology available in the industry, our car lifts are built to safety standards well above OSHA/ALI/ETL requirements. The BendPak XPR Two-Post Car Lifts include a wealth of standard and optional features to support the operator with performance and security. Combined with BendPak’s tradition of durable design, the XPR Two-Post Lift Series has become the new industry gold standard trusted by automotive technicians the world over.
Whatever the job, there's a BendPak XPR-Series 2-Post Lift designed to meet your needs. The XPR-Series features and
When you purchase a BendPak car lift, you can expect a significant boost in both performance and automotive lift life expectancy. In fact, your BendPak XPR-9DS might be the last lift you ever purchase. No one surpasses BendPak in quality and safety. When you get a BendPak car lift, you get more than just a fantastic piece of heavy-duty garage equipment; you get peace of mind.
Getting the right lift for your application is easy with the help of your local BendPak dealer or by investigating the customer-focused product materials found on our website.
Every XPR-9DS comes
BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and
Low-profile, dropped-end frame contact pads
Squeeze under even the lowest compact and
Triple-telescoping front arms and two-stage rear arms
Increases overall arm positioning for lifting a variety of different wheel base vehicles. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM recommended pick-up points and wide and / or narrow wheelbase configurations.
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our two-post arm tube supports to allow for better clearance.
Automatic arm restraints
Each lifting arm is equipped with durable lift arm restraints that automatically engage each time the lift is raised. When the
Taller lift carriages
Take a close look at our lift carriages (the lifting assembly that the arms are attached to). Now take a look at the competition. You’ll notice our 53” carriages are considerably taller than most, which minimizes the stress placed on the load bearings and columns.
Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.
We specifically manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Wide or narrow selection
Wide or narrow designs are available, allowing you to maximize your floor space.
Dual direct-drive technology
By utilizing two, low-pressure HVLP direct-drive cylinders, we’ve eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. HVLP direct-drive technology offers better reliability, smoother
Single-point safety release
The single point safety release and “dead man” style operation controls make every one of our XPR-Series Car & Truck Lifts easy to operate and safe to use.
On the level
Our dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.
Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot
Free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC
Durable powder-coat finish
All XPR-Series Car Lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted.
Included with every BendPak car and truck lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.
* CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via email@example.com.
- 9,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
- Adjustable width design configures for wide or narrow installation
- Direct-drive lifting system eliminates chains and pulleys
- Dual hydraulic lifting cylinders
- Single-piece columns
- Single point safety release
- Drop-end arms provide alower pad height
- Triple-telescoping arms provide increased range for lifting point access
- Electric / hydraulic power system
- Large, 20" x 19" steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Automatic arm restraints
- Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
- 4-piece 63 mm stackable adapter set comes standard
|Lifting Capacity*||9,000 lbs. / 4082 kg|
|*Max Capacity / Front Axle||4,500 lbs. / 2041 kg|
|*Max Capacity / Rear Axle||4,500 lbs. / 2041 kg|
|A - Height Overall:||145" / 3683 mm|
|B - Width Overall: (NARROW)||132" / 3353 mm|
|B - Width Overall: (WIDE)||145" / 3683 mm|
|C - Width Outside of Columns: (NARROW)||126-3/4" / 3225 mm|
|C - Width Outside of Columns: (WIDE)||139-3/4" / 3555 mm|
|D - Floor Pan Height:||1-3/4" / 44 mm|
|E - Inside Columns: (NARROW)||105" / 2667 mm|
|E - Inside Columns: (WIDE)||118" / 2997 mm|
|F - Reach (Front Arm Min.):||27-1/2" / 698 mm|
|G - Reach (Front Arm Max.):||51-1/2" / 1308 mm|
|H - Reach (Rear Arm Min.):||34" / 863 mm|
|I - Reach (Rear Arm Max.):||54-1/2" / 1384 mm|
|J - Min. Pad Height:||4" / 102 mm|
|K - Rise:||69" / 1753 mm|
|L - Max Lift Height (Pad Only):||73" - 75" / 1854 - 1905 mm|
|M - Max Lift Height (3" Adapter):||75.5" - 77.5" / 1917 mm - 1968 mm|
|N - Drive-Thru Clearance: (NARROW)||93" / 2362 mm|
|N - Drive-Thru Clearance: (WIDE)||106" / 2692 mm|
|Screw Pad Adjustment:||2" / 51 mm|
|Motor (**)||220 VAC / 60 Hz. 1Ph.|
|Time of full Rise:||45 Seconds|
|Max Load Per Arm:||2,250 Lbs. / 1021 kg|
Featured accessories for the XPR-9DS
|Lifting capacity:||9,000 lbs.|
|Overall width:||132" - 145"|
|Min pad height:||4"|
|Motor:||220 VAC / 1 Ph|
|Rise time:||45 sec.|
View Full Specs »