SP-7X 7,000-lb. Capacity, Scissors, Frame Engaging
BendPak SP-7X scissor lift
You haven't experienced state-of-the-art compact lifting convenience until you've used the BendPak SP-7X. This 7,000-lb. capable lift comes loaded with an extendible, pull-out top lift platform, equalization torsion bar, hardened pivot pins, dual hydraulic cylinders and ergonomic controls. Let the SP-7X take those vehicles, and your bottom line, to new heights. BendPak LR-4A optional arm kit available.

    When you need to add versatility and productivity to your shop or garage, your first stop should always be BendPak. The SP-7X is the mighty 7,000-lb., full-rise scissor lift that won't hog your precious floorspace and fits nicely into narrower bays. A frame engaging lift, it easily accommodates most passenger vehicles and light trucks and comes replete with pneumatic safety locks, rubber lifting blocks and an open center for full under-car accessibility. Always bet on BendPak for increased durability, safety and productivity. You aren't going find comparable quality or value anywhere else—BendPak always bests the rest.


    Electric / hydraulic power system
    We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

    Dual-cylinder design
    Each scissor lift is equipped with 2 hydraulic cylinders for maximum performance, reliability and precise leveling. The dual-cylinder design maintains constant level and safety using cross flow hydraulic technology, pressure flow control and integrated velocity fuses. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-designed high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

    Large base frame
    Heavy boxed-steel formed base frame provides solid stability. See the flush-mount dimensions here.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.

    Flush mount dimensions for the SP-7X
    • 7,000-lb. lifting capacity
    • Extended pull-out top lift platform
    • Pneumatic safety locks
    • Equalization torsion bar
    • Hardened pivot pins with "Zirk" fittings
    • Open-center design
    • Ergonomic controls
    • Dual-cylinder hydraulic design provides extra power
    • Low-profile

      floorplan2.jpg

    • How to choose the right car lift for you

      Safe balancing for BendPak car lifts

      BendPak's Top 10 Car Lift Buyers Guide

    • Lifting capacity: 7,000 lbs. / 3,175 kg
    • Max lifting height: 68" / 1,727 mm
    • Overall length: 163-1/2" / 4,153 mm
    • Overall width: 74-1/2" / 1,892 mm
    • Lift platform: 21-1/2" x 63" – 70" / 47 mm x 1,600 mm – 1,778 mm
    • Lowered height: 5" / 127 mm
    • Width between pads: 31-1/2" / 801 mm
    • Lifting time: 45 sec
    • Motor: 220 VAC / 60 Hz / 1 Ph
    • Shipping weight: 2,318 lbs. / 1,054 kg
    • Shipping dimensions: 106" x 76" x 46" / 2,692 mm x 1,930 mm x 1,168 mm

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.

    BendPak SP-7X scissor lift
    BendPak SP-7X scissor lift
    Lowered SP-7X scissor lift with power unit console
    SP-7X power unit console with controls
    SP-7X safety release assembly

    Featured accessories for the SP-7X


    What customers are saying about SP-7X Car Lifts by BendPak



    "Bendpak SP-7X has to be the best lift designs I have ever experienced. They are built very well too. I did A LOT of research before putting a lift in my storage facility. I went from conventional 2 post to SP-7X and the difference is night and day.  Saves space. Looks clean. Easy to operate. Even easier to place the vehicle on it. Leaves a ton of room under and around the vehicle."

    - R1der on lamborghini-talk



    "It's a Bend-pak scissor lift. it is portable. it even has wheels on it so its easy to roll around. we havent ever moved it, but it was put up in about 30 minutes. it serves my purpose great!"

    - slow90coupe on svtperformance

         Call Us Toll Free:
    800-253-2363
    deliverydetails.jpg

    Quick Specs

    Lifting capacity: 7,000 lbs.
    Lifting height: 68"
    Lowered height: 5"
    Overall length: 163-1/2"
    Overall width: 74-1/2"
    Lifting time: 45 sec
    Shipping weight: 2,318 lbs.
    View Full Specs »
    ©2012 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk