Pardon the dust as BendPak's website transitions its Car Lifts to Gunmetal Gray! Learn more »
PLS-10 10,000-lb. Capacity Subterranean Parking Lift System
PSL-10 Subterranean Parking Lift
The PLS-10 subterranean parking lift has set the standard for safe and convenient underground storage of cars, SUVs, and specialty vehicles. A powerful hydraulic scissors system provides smooth, safe, and quiet operation.

    PLS-10 subterranean parking lift available by special order only.

    The PLS-10 allows vehicles to be parked in secure underground parking locations while allowing a second vehicle to be parked above. The rugged lift structure, hydraulic and power components are completely concealed below ground so there is no indication that a lift or additional vehicle is safely stored below.

    Leak proof cylinder technology only available for BendPak four-post liftsThe PLS-10 parking lift is ideal for car enthusiasts whose passion for cars exceeds their space to store them. The PLS-10 makes it possible to use a garage with a lower ceiling height and utilizes a basement area below the garage or a pit constructed in the garage floor. If you have adequate ceiling clearance, it’s possible to retrieve the lower vehicle without having to remove the upper vehicle. The PL-18000 can accommodate both cars and SUVs and may be configured as a stand-alone lift or combined into rows of multiple units. When installed in rows of multiple units, the lifts share columns dramatically increasing space efficiency. The rugged built design utilizes a dependable hydraulic and cable-based lifting system for ultimate efficiency and safe operation.

    • Double your space by parking two vehicles in the footprint of one parking stall
    • 10,000 pound lifting capacity / 5,000 pounds per deck
    • Unobtrusive and secure - the lift and lower vehicle are completely concealed
    • Fail safe locking system
    • Aesthetically pleasing - canopy surface can be tiled to match surroundings
    • Multiple units can be installed side-by-side for use in condos, offices, etc.
    • Superstructure features durable powder-coat finish
    • Ideal for low-ceiling applications - use as verticle tandem parking to save space
    • Safe, easy to operate
    • Reliable electric-hydraulic power system
    • "Up/Down" operator push button station
    • Solenoid operated lowering
    • Pilot-operated check valve and "velocity fuses" on each cylinder in the event of catastrophic hose failure
    • Tapered toe guard protection around deck perimeter
    • Hydrauling bypass protection in the hydraulic circuit to prevent the system from exceeding the 3,000 PSI max lifting capacity
    • Maintenance configuration provides support in a raised position when engaged for safe inspection, maintenance and repair
    • Emergency stop button
    • 5 HP 230V 1 phase power unit / optional voltage requirements available

    • How to choose the right car lift for you

      Safe balancing for BendPak car lifts

      BendPak's Top 10 Car Lift Buyers Guide

      *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
      PSL-10 Subterranean Parking Lift
      PSL-10 Subterranean Parking Lift

      Featured accessories for the PLS-10


           Call Us Toll Free:
      800-253-2363



      deliverydetails.jpg

      Request More Info on the PLS-10!

      ©2016 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
      SEO Friendly CMS by Pixelsilk