HD-9SWX 9,000-lb. Capacity Super Wide 82" Rise Car Stacker Parking Lift
HD-9SWX double-vehicle storage four post lift
The HD-9SWX is the DIYer's super-tall, double-vehicle storage and service solution. Store two vehicles on four runways. Available with casters, drip-trays, jack platform and more.

    If you're looking for a little more lift and a lot less column interference, then our HD-9SWX four post lifts are the answer. These super-wide 4-post lifts are designed to transform your garage into a state-of-the-art parking facility--turning that two-car space into a four-car trophy stand. The HD-9SW is a standard rise unit with standard length runways and the HD-9SWX is an extended length model with higher rise if you're looking for additional clearance underneath.

    Designed into every HD-Series lift is a laundry list of features as long as your arm to ensure that BendPak is the absolute best you can buy. We design our lifts with the attributes we feel should come standard with every lift. You can always count on BendPak lifts for increased durability, safety and productivity. Spend less time worrying about what you're working under and more time doing what you love. Our commercial-grade lifts are second to none and recognized the world-over as benchmarks of dependability and quality.

    The HD-9SWX is an industrial-strength 9,000-lb. capacity lift that works equally well in the service shop and at home. The super-wide construction allows this lift to raise and store two vehicles simultaneously on four runways, while the high-rise design ensures you’ll rarely find a vehicle that won’t fit underneath. When you add in all of the optional kits, this becomes one extremely adaptable four-post. As with all BendPak products, we’ve engineered the HD-9SWX to be tougher and safer than it needs to be. Where other companies might try to get away with the bare minimum, you can always bet on BendPak to find the perfect cross-section of quality, durability and safety.

    The HD-9SWX is the high rise version of this lift. If you are looking to go wide, but keep it standard height, consider the HD-9SW.

    Double lifter
    The unique double-wide design lets you lift and store two vehicles simultaneously. It's like having two lifts, but it takes up much less space.

    Dependable design
    4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.

    Dual-hub cable sheaves
    Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind free with every lift.

    Multi-level locking positions
    The HD-9SWX is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

    Heavy-duty aircraft cable
    Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is 640% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

    Electric / hydraulic power system
    We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

    Large base plates
    10" x 12" base plates provide a solid foundation for the HD-9SWX.

    Single hydraulic cylinder
    Leak proof cylinder technology only available for BendPak four-post lifts
    Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

    Durable powder-coat finish
    All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

    Integrated design
    Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

    Low-deck runways
    Our low 4-1/2" runways accommodate even the lowest cars.

    Longer approach ramps
    These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.

    Automatic safety locks
    Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

    Optional caster kit


    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    • 9,000-lb. maximum lifting capacity
    • Freestanding design
    • Perfect for parking, storage and service
    • Double-wide configuration for quad-vehicle storage
    • Four runways
    • Super-tall rise
    • Extra-long ramp
    • Runways accommodate wide or narrow vehicles
    • Runways include rail-kit for optional accessories
    • Electric / hydraulic power system
    • Single hydraulic cylinder mounted underneath runway
    • Fully enclosed lifting cables, safety locks and sheaves
    • Internal anti-sway slider blocks in each column
    • Oversized self-lubricating cable rollers
    • Oversized sheave diameter reduces cable fatigue
    • High-speed lifting
    • Features heavy-duty 3/8" aircraft cable
    • Rugged 1-1/4" roller axles
    • Multi-position safety locks in each column
    • Adjustable lock ladders
    • Runways feature non-skid surface
    • Push-button pneumatic safety release
    • Independent backup slack-cable safety latches
    • Inside runways adjust for different tread widths
    • Customizable power unit location
    • Removable approach ramps for additional drive-under clearance
    • Optional drive-thru ramps available
    • Optional drip trays available
    • Optional solid deck available to increase storage capacity
    • Optional 4,500-lb. air / hydraulic rolling jacks available

      floorplan2.jpg

    • Best Warranty Car Lifts - BendPak

      Will your four-post car lift fit?

      Safe balancing for BendPak car lifts

      How to choose the right car lift for you

      BendPak's Top 10 Car Lift Buyers Guide

    • Lifting capacity*: 9,000 lbs. / 4,082 kg
      • *Max capacity / front axle: 4,500 lbs. / 2,041 kg
      • *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
    • Overall width: 202" / 5,131 mm
    • Outside length: 198" / 5,029 mm
    • Overall length: 224" / 5,690 mm
    • Height of columns: 100" / 2,540 mm
    • Runway min height: 7" / 178 mm
    • Max rise: 82" / 2,083 mm
    • Max lifting height: 89" / 2,261 mm
    • Width between posts: 192" / 4,877 mm
    • Runway width: 19" / 483 mm
    • Width between runways: 37" – 42" / 940 mm – 1,067 mm
    • Length of runways: 188" / 4,775 mm
    • Min wheelbase @ rated capacity: 135" / 3,429 mm
    • Min wheelbase @ 75% capacity: 115" / 2,921 mm
    • Min wheelbase @ 50% capacity: 95" / 2,413 mm
    • Min wheelbase @ 25% capacity: 80" / 2,032 mm
    • Outside column spacing: 15-1/2" / 394 mm
    • Locking positions: 15
    • Lock spacing: every 4" / 102 mm
    • Lifting time: 65 sec
    • Motor: 220 VAC / 60 Hz / 1 Ph
    • Shipping weight: 3,892 lbs. / 1,769 kg
    • Shipping dimensions: 216" x 24" x 48" / 5,486 mm x 610 mm x 1,219 mm

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    HD-9SWX double-vehicle storage four post lift
    HD-9SWX double-vehicle storage four post lift
    HD-9SWX power unit pump assembly
    HD-9SWX cable roller sheave assembly
    HD-9SWX safety lock release assembly
    HD-9SWX secondary slack safety lock mechanism
    HD-9SWX cable block assembly
    HD-9 Car Lift Side View

    Featured accessories for the HD-9SWX


    What customers are saying about HD-9 Car Lifts by BendPak



    "I considered other brands - Backyard Buddy, Rotary, Revolution (Rotary), and Direct Lift. In the end, the combination of price (about $3500 installed, including casters which allow one to move the lift around), reputation of brand, (auto) air safety locks, enclosed cabling, adjustable ramp width (between 37.25" and 44" inside to inside), and optional rolling bridge jack made the BendPak the best option for me. (plus, the blue matches my other lift)"

    - HIRISC on 6speedonline


    "I have had a Bend-Pak HD9 9000 lb four post lift since December 2004. I've basically been happy with it. It has worked fine and required little maintenance."

    - heinzd01 on Camaro 5


    "I've been building a couple project cars with the HD-9's and I love them. Complete access to everything I've needed to do. Fabricate a complete exhaust pulled a couple motors, big brake swaps, loaded alignments, etc."

    - ket-tek on garagejournal


    "My Bendpak lift sure comes in handy….It's a Bendpak HD-9 lift with 2 roller jacks installed. Bendpak modified the jack setup to accommodate my low clearance cars."

    rzundel on audizine


    "As far as lifts go, there are a bunch of different styles out there ranging from two-, four-post and scissor lifts, all with varying load limits. A nice four-post lift (HD-9, $2,660) is offered by BendPak and supports up to 9,000 pounds; enough for most any project vehicle and then some."

    - The Auto Insider on Jalopnik


    "Have a 'BendPak' 4-post in my garage...I think it was their entry-level lift, but it still handles 9,000 lbs...It has worked perfectly, is built better than all the 7,000 lb China-made lifts & cost much less than the Backyard Buddys...It's called the 'HD-9.'"

    - judgeman6970 on challengertalk


    "Don't skimp. I have a 9,000 lb capacity BendPak 5 post lift. Love it. With the casters, it can be rolled anywhere with 1 - 2 people pushing."

    - kirks5oh on svtperformance
         Call Us Toll Free:
    800-253-2363
    deliverydetails.jpg

    Quick Specs

    Lifting capacity: 9,000 lbs.
    Overall width: 202"
    Overall length: 224"
    Height of columns: 100"
    Max rise: 82"
    Length of runways: 188"
    Motor: 220 VAC / 1 Ph
    Shipping weight: 3,892 lbs.
    View Full Specs »
    ©2014 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk