HD-7PXW (REV. M) 7K Capacity / Super-Tall / Four-Post Lift / WIDE
BendPak HD-7PXW high-lift four post lift
The HD-7PXW is literal giant. This 4 post lift will effortlessly lift up to 7,000 lbs. over 12' into the air! Perfect for stacking taller vehicles. The HD-7PXW is the wider model of this super tall lift.

    BendPak's HD-7PXW (REV. M) is a super-tall, four-post, runway-style lift platform designed for professional use in service bays. A true lifting powerhouse, this high-speed lift will easily hoist 3-1/2 tons to heights exceeding 12'. Now you can finally store your high-profile trucks, vans and Winnebagos.

    Dependable design
    4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.

    Dual-hub cable sheaves
    Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.

    Multi-level locking positions
    The HD-7PXW is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

    Heavy-duty aircraft cable
    Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

    Electric / hydraulic power system
    We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

    Large base plates
    10" x 12" base plates provide a solid foundation for the HD-7P.

    Single hydraulic cylinder
    Leak proof cylinder technology only available for BendPak four-post lifts
    Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

    Durable powder-coat finish
    All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

    Integrated design
    Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

    Automatic safety locks
    Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    • 7,000-lb. maximum lifting capacity
    • Super-tall lift
    • Runways include outside guide rails
    • Electric / hydraulic power system
    • Single hydraulic cylinder mounted underneath runway
    • Internal anti-sway slider blocks in each column
    • Oversized self-lubricating cable rollers
    • High-speed lifting
    • Features heavy-duty 3/8" aircraft cable
    • Rugged 1-1/4" roller axles
    • Multi-position safety locks in each column
    • Adjustable lock ladders
    • Runways feature non-skid surface
    • Push-button pneumatic safety release


    • Best Warranty Car Lifts - BendPak

      Safe balancing for BendPak car lifts

      How to choose the right car lift for you

      BendPak's Top 10 Car Lift Buyers Guide

      MODEL HD-7PXW (Rev. M)
      Configuration Wide / Super-Tall Rise
      Lifting Capacity 7,000 Lbs. / 3175 Kg.
      Max Capacity / Front Axle 3,500 Lbs. / 1588 Kg.
      Max Capacity / Rear Axle 3,500 Lbs. / 1588 Kg.
      A - Overall Width 110-1/4" / 2800 mm.
      B - Outside Length 198” / 5029 mm.
      C - Overall Length 213” / 5410 mm.
      D - Height of Columns 158” / 4011 mm.
      E – Min. Runway Height 4-1/2” / 114 mm.
      F – Max. Rise 140” / 3556 mm.
      G - Max. Lifting Height 145” / 3685 mm.
      H - Width Between Columns 100‐1/4” / 2,555 mm.
      I - Runway Width 19” / 483 mm.
      J - Width Between Runways (*) NARROW 37-1/2" / 952 mm.
      J - Width Between Runways (*) WIDE 44-3/8" / 1127 mm.
      K - Runway Centerline (*) NARROW 56-1/2" / 1435 mm.
      K - Runway Centerline (*) WIDE 63-3/8" / 1610 mm.
      L - Outside Edge of Runways (*) NARROW 75-1/2" / 1918 mm.
      L - Outside Edge of Runways (*) WIDE 82-3/8" / 2092 mm.
      M - Drive-Thru-Clearance 86-1/2" / 2197 mm.
      N - Length of Runways 188" / 4775 mm.
      Min. Wheelbase @ Rated Capacity 135" / 3429 mm.
      Min. Wheelbase @ 75% Capacity 115" / 2921 mm.
      Min. Wheelbase @ 50% Capacity 95" / 2413 mm.
      Min. Wheelbase @ 25% Capacity 80" / 2032 mm.
      Locking Positions 30
      Lock Spacing Every 4" / 102 mm.
      Lifting Time 60 Seconds
      Standard Motor (**) 208-230 VAC / 50-60 Hz. / 1Ph.

      * This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.
      ** Special Voltages Available Upon Request
      The design, material and specifications are subject to change without notice.

      An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.


      *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

      BendPak HD-7PXW high-lift four post lift
      BendPak HD-7PXW high-lift four post lift
      HD-7PXW safety release assembly
      HD-7PXW floor plate
      HD-7PXW cylinder assembly
      HD-7PXW post brace assembly
      HD-7PXW power unit pump assembly
      HD-7PXW cable roller sheave assembly

      Featured accessories for the HD-7PXW

      What customers are saying about HD-7 Series Car Lifts by BendPak

      "I have a BendPak four post lift and couldn't work on cars without it."

      - oldmodman on svtperformance

      "I have a BendPak four post lift. It is about 4 years old and has a 7,000 pound capacity. I went with that one due to it's being 120v instead of 220 like all the heavier duty lifts...It has been trouble free."

      - oldmodman on svtperformance
           Call Us Toll Free:


      Request More Info on the HD-7PXW!

      Quick Specs

      Lifting capacity: 7,000 lbs.
      Overall width: 110-1/4"
      Overall length: 224"
      Height of columns: 158"
      Max rise: 140"
      Length of runways: 188"
      Motor: 220 VAC / 1 Ph
      View Full Specs »
      ©2016 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
      SEO Friendly CMS by Pixelsilk