The HD-7P is a true space-saving powerhouse. The perfect service lift for shops with limited floor space or a home
4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.
Dual-hub cable sheaves
Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.
Multi-level locking positions
The HD-7P is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
Heavy-duty aircraft cable
Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.
Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
Large base plates
10" x 12" base plates provide a solid foundation for the HD-7P.
Single hydraulic cylinder
Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot
Durable powder-coat finish
All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust
Optional 4-piece caster kit makes your lift portable, with or without
Lifting cables, airlines, safety latches and sheaves are all fully enclosed.
Our low 4-1/2" runways accommodate even the lowest cars.
Longer approach ramps
These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.
Automatic safety locks
Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.
- 7,000-lb. maximum lifting capacity
- High lift with short runways
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1-1/4" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Ramps feature non-skid surface
- Push-button pneumatic safety release
- Optional 4,500-lb. capacity rolling jack available (Model RJ-45)
Configuration Short Runway / Narrow / High Rise
Lifting Capacity 7,000 Lbs. / 3175 Kg.
Max Capacity / Front Axle 3,500 Lbs. / 1588 Kg.
Max Capacity / Rear Axle 3,500 Lbs. / 1588 Kg.
A - Overall Width 99-3/4" / 2534 mm.
B - Outside Length 174” / 4420 mm.
C - Overall Length 200” / 5080 mm.
D - Height of Columns 100” / 2540 mm.
E – Min. Runway Height 4-1/2” / 114 mm.
F – Max. Rise 82” / 2083 mm.
G - Max. Lifting Height 86-1/2" / 2197 mm.
H - Width Between Columns 89-3/4" / 2280 mm.
I - Runway Width 19” / 483 mm.
J - Width Between Runways (*) NARROW 37-1/2" / 952 mm.
J - Width Between Runways (*) WIDE N/A
K - Runway Centerline (*) NARROW 56-1/2" / 1435 mm.
K - Runway Centerline (*) WIDE N/A
L - Outside Edge of Runways (*) NARROW 75-1/2" / 1918 mm.
L - Outside Edge of Runways (*) WIDE N/A
M - Drive-Thru-Clearance 76-1/2" / 1943 mm.
N - Length of Runways 164” / 4166 mm.
Min. Wheelbase @ Rated Capacity 115" / 2921 mm.
Min. Wheelbase @ 75% Capacity 100" / 2540 mm.
Min. Wheelbase @ 50% Capacity 85" / 2159 m.
Min. Wheelbase @ 25% Capacity 70" / 1778 mm.
Locking Positions 15
Lock Spacing Every 4" / 102 mm.
Lifting Time 35 Seconds
Standard Motor (**) 208-230 VAC / 50-60 Hz. / 1Ph.
* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.
** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Featured accessories for the HD-7P
What customers are saying about HD-7P Car Lifts by BendPak
"I have a BendPak four post lift and couldn't work on cars without it."
- oldmodman on svtperformance
"I have a BendPak four post lift. It is about 4 years old and has a 7,000 pound capacity. I went with that one due to it's being 120v instead of 220 like all the heavier duty lifts...It has been trouble free."
- oldmodman on svtperformance
Request More Info on the HD-7P!
|Lifting capacity:||7,000 lbs.|
|Height of columns:||100"|
|Length of runways:||165"|
|Motor:||220 VAC / 1 Ph