HD-9AE 9,000-lb. Capacity Alignment Car Lift
BendPak HD-9AE Four-Post Alignment Lift
The HD-9AE four‐post alignment lift provides 9,000-lbs. of lifting capacity to accommodate a variety of light duty trucks and automobiles.
    The HD-9AE four-post car lifting and alignment system features adjustable multi-position leveling, integrated front radius plates and rear slip plates, making it compatible with all leading alignment instrumentation including 3D and camera wheel alignment systems.
    • Multi-caster slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment.
    • Dual radius plate positions for better vehicle accommodation.
    • Heavy-duty stainless-steel lifting cables provide a great balance of strength, abrasion resistance and fatigue.
    • Dual-hub cable sheaves reduce stress, fatigue and wear.
    • Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
    • The HD-9AE features a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements.
    • An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
    • A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
    • Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
    • A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
      Leak proof cylinder technology only available for BendPak four-post lifts
    • A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
    • Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure. ­­
    • Features multiple adjustable height locking positions for variable-height parking and infinite leveling.
    • A maintenance-free electric hydraulic power system assures ultimate dependability.
    • All operator controls are conveniently located within easy reach.
    • Non-skid runways provides maximum grip, even when the runway surface is wet or oily.

    Optional 4,500 lb. capacity rolling jacks (model RJ-45) make a great addition to increase service capacity. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    • 9,000-lb. maximum lifting capacity
    • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
    • Multi-caster slip plates
    • Dual radius plate positions
    • heavy-duty stainless steel lifting cables
    • Dual-hub cable sheaves
    • Grease nipples on every sheave and sheave axle
    • Single hydraulic cylinder
    • Integrated hydraulic flow restrictor
    • Durable powser coat finish
    • Spring-loaded safety locks
    • Simple push-button lock release
    • Aircraft-quality stainless steel and aluminum pneumatic cylinders
    • Secondary lock system
    • Fully enclosed cables, airlines, safety latches and sheaves
    • Multiple adjustable height locking positions
    • Maintenance-free power system
    • Easy-to-reach operator controls
    • Non-skid runways

      floorplan2.jpg

    • How to choose the right car lift for you

      Safe balancing for BendPak car lifts

      BendPak's Top 10 Car Lift Buyers Guide

    • Overall width: 127" / 3,226 mm
    • Outside length: 198" / 5,029 mm
    • Overall length: 224" / 5,690 mm
    • Height of columns: 88" / 2,235 mm
    • Runway min height: 6-1/2" / 165 mm
    • Max rise: 70" / 1,778 mm
    • Max lifting height: 76-1/2" / 1,943 mm
    • Width between posts: 117" / 2,972 mm
    • Runway width: 19" / 483 mm
    • Width between runways: 40" / 1,016
    • Length of runways: 188" / 4,775 mm
    • Min. wheelbase @ rated capacity: 135" / 3,429 mm
    • Min. wheelbase @ 75% capacity: 115" / 2,921 mm
    • Min. wheelbase @ 50% capacity: 95" / 2,413 mm
    • Min. wheelbase @ 25% capacity: 80" / 2,032 mm
    • Locking positions: 12
    • Lock spacing: every 4" / 102 mm
    • Lifting time: 60 sec
    • Motor: 220 VAC / 60 Hz / 1 Ph

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.


    BendPak HD-9AE Four-Post Alignment Lift
    BendPak HD-9AE Four-Post Alignment Lift
    BendPak HD-9AE Four-Post Alignment Lift
    BendPak HD-9AE Four-Post Alignment Lift Slip Plates
    BendPak HD-9AE Four-Post Alignment Lift Sliding Jack Rolling Jack
    BendPak HD-9AE Four-Post Alignment Lift Turn Plates

    Featured accessories for the HD-9AE


         Call Us Toll Free:
    800-253-2363



    deliverydetails.jpg

    Request More Info on the HD-9AE!

    Quick Specs

    Lifting capacity: 9,000 lbs.
    Overall width: 127"
    Overall length: 224"
    Height of columns: 88"
    Max rise: 70"
    Length of runways: 188"




    CE-certified.jpg


    View Full Specs »
    ©2016 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk