Pardon the dust as BendPak's website transitions its Car Lifts to Gunmetal Gray! Learn more »
MLS-16 Mobile High-Lift Jack Stand
BendPak High Lift Jack Stand
For extra support exactly where you need it most, count on the BendPak MLS-16 Mobile High-Lift Jack Stands. They're capable of holding up to 16,000 lbs. each!

     Discontinued_BendPak.jpg

     

    The MLS-16 is an especially rugged support stand, crafted specifically to assist you when working on raised, heavy-duty vehicles. Once the stands are properly in place, you're free to maintain, inspect and service just about any car or truck without fear of equipment failure. These support stands can be safely used in sets of 4, 6 or 8. Must be positioned beneath a raised, level vehicle at support points designated by the vehicle manufacturer.


    • 16,000-lb. max rated capacity
    • Tripod design evenly distributes weight under load
    • Each leg is equipped with a 6" square inch floor pad
    • Can be easily moved and placed under a vehicle by means of two 5" diameter wheels
    • Equipped with a fold-away transport handle
    • Center tube is spring assisted to facilitate adjustment of the stand
    • Adjustable from 54" to 78"
    • 10 pin positions
    • 2.25" diameter self-locking ACME screw for fine adjustment of the stand height

    • Minimum height: 54" / 1,372 mm
    • Maximum height: 78" / 1,981 mm
    • Number of pin positions: 10
    • Screw fine adjustment: 6" / 152 mm
    • Stroke: 26" / 660 mm
    • Base diameter: 32" / 813 mm
    • Wheels / Diameter: 5" / 127
    • Top Pad Diameter: 7-1/4" / 184 mm
    • Stand capacity: 16,000 lbs. / 7,256 kg
    BendPak High Lift Jack Stand
    BendPak High Lift Jack Stand
    Technician and BendPak car lift jack stand
    Car lift jack stand in the lowered position

    Featured accessories for the MLS-16


         Call Us Toll Free:
    800-253-2363



    deliverydetails.jpg

    Request More Info on the MLS-16!

    Quick Specs

    Capacity: 16,000 lbs.
    Max. height: 78"
    Min. height: 54"
    Pin positions: 10
    Screw adjustment: 6"
    Stroke: 26"
    Base: 32"
    Pad: 7-1/4"
    View Full Specs »
    ©2016 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk