• 
  WSA-100
  Optional Air / Electric Workstation
  The handy WSA-100 utility box takes convenience to a whole new level. Whose garage couldn't use a couple extra electrical and air outlets? Mount the WSA-100 on your BendPak lift to turn it into a new one-stop hub.
• 
  Steel Pads
  Steel Lift Pads / Set of 4
  Designed for high-volume shops that are constantly loading / unloading vehicles, this pack of lift pads is perfect for your BendPak two-post lift.
• 
  Screw Pads
  Adjustable Screw Lift Pads With Receiver
  These adjustable screw lift pads give an additional 3" of lift to 9,000 and 10,000-lb. BendPak two-post lifts.
• 
  Air Bottle
  Compressed Air Bottle for BendPak Car Lifts
  No need for a compressor! BendPak's Compressed Air Bottle allows you to easily release all your car lift's safety locks at once with a solution that fits right under the ramp.
• 
  Rubber Pads
  Rubber Lift Pad - Slip Over
  These rubber lift pads outfit your BendPak two-post with extra carriage-gripping capabilities. Textured surface reduces migration, and the slip-over design makes installation a snap.
• 
  Aluminum Deck
  Full-Length Middle Deck Platform / Diamond Plate
  The optional Solid Deck makes your BendPak HD-9 Series 4-Post lift even more versatile with room for storage and fluid-protection for flooring and vehicles.
• 
  Drip Trays (Set of 2)
  Polypropylene Drip Trays for Four-Post Car Lifts
  A light-weight, cost-effective solution to drips, these drip trays will catch harmful fluids and keep them in one place to protect your vehicles and garage flooring. Sold in sets of two.
• 
  Drop-In Pads
  Rubber Lift Pad - Drop In
  These rubber lift pads outfit your BendPak two-post with extra carriage-gripping capabilities. Textured surface reduces migration, and the drop-in design makes installation a snap.
• 
  Round Slip-Over Pads
  Round Slip-Over Pads
  These rubber lift pads outfit your BendPak two-post with extra carriage-gripping capabilities. Textured surface reduces migration, and the slip-over design makes installation a snap. New round design offers extra multi-directional grip.
• 
  Frame Cradle
  Frame Cradle Pad / Set of 4
  If you've got a heavy vehicle to lift, especially a truck, then you're going to want a set of these BendPak Frame Cradle Pads. Sturdy steel construction keeps the frame firmly between the lips, while the treaded rubber mats protect the finish and reduce the chance of slippage.
• 
  MLS-16
  Mobile High-Lift Jack Stand
  For extra support exactly where you need it most, count on the BendPak MLS-16 Mobile High-Lift Jack Stands. They're capable of holding up to 16,000 lbs. each!
• 
  LR-4A
  LR-4A Optional Arm Kit – 4 Arms
  Easy-to-use optional arm kit fits BendPak low-rise models LR-60, LR-60P, P-6 and P-6F.
• 
  JP-3
  3,000-lb. Capacity Sliding Jack Platform for Runway Lifts
  This convenient sliding jack is capable of lifting 3,000 lbs. Designed specifically for use with four-post style runway lifts, lube racks and quick-lube pits.
• 
  Offset Adapters
  Offset Adapters for Two-Post Car Lifts
  Offset adapter design allows operators to easily position lift points without the need for constant arm tube adjustment.
• 
  JP-6
  6,000-lb. Capacity Sliding Jack Platform for Runway Lifts
  This convenient sliding jack is capable of lifting 6,000 lbs. Designed specifically for use with four-post style runway lifts, lube racks and quick-lube pits.
• 
  DP-30
  15-Gallon Rolling Drain Pan for Four-Post Lifts
  Use the 15-Gallon Rolling Oil Drain Pan to perform fluid changes with your lube rack, quick-lube pit or BendPak four-post lift.
• 
  Caster Kit
  Portable Wheel Kit for HD-9 Series
  Mobilize your BendPak HD-9 4-Post Lift with this high-quality caster kit. Move your BendPak four post car lift all around the shop and avoid inconvenient tear-down and re-assembly time.
• 
  RJ-45 Adapter Kit
  For RJ-45 Four-Post Bridge Jacks
  This four‐piece adapter set increases the service capability of the BendPak RJ‐45 rolling bridge jack by providing sliding adapters that mount on the main center tube.
• 
  AK-14
  Integrated Rolling Bridge Airline Kit
  This integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling bridge jacks.
• 
  Ramps
  Four-Post Car Lift Aluminum Approach Ramps
  These optional aluminum approach ramps fit all BendPak HD-7 and HD-9 Series lifts and replace the standard steel approach ramps.
• 
  300-1
  Large 3” Die Package – Optional
  Optional die package extends the bending capabilities of your BendPak Pipe Bender.
• 
  300-2
  Small 3” Die Package – Optional
  Optional die package extends the bending capabilities of your BendPak Pipe Bender.
• 
  CS-1
  Card System Complete with Rotation Dial / Computer CD
  Our deluxe card system program contains over 3,500 cards on one CD, covering over 10,000 bending applications.
• 
  Anti Vibration
  Anti-Vibration Pads
  Keep your compressor from vibrating itself into disrepair with these optional 1/2" rubber pads.
• 
  5179400
  Moisture Minder - Optional
  Moisture Minder® timed drain valve with ball valve and strainer—the new standard for solenoid drains.
• 
  5179401
  Moisture Minder Installation Kit
  Mount your Moisture Minder® properly and with ease using our handy installation kit.
• 
  Roll-Back Kit
  Roll-Back Bar Kit for Alignment Lifts
  These specially machined bars act as a bridge between the runways and the turn plats on BendPak alignment lifts.
• 
  Receiver Tank
  120-Gallon Air Receiver Tank - Optional
  Optional 120-gallon receiver tank for the BendPak LS15RS rotary-screw compressor.

Deck out your car lift with the latest accessories from BendPak. It's all in the details.

Car lift accessories
Whether it's specialty lifting pad for a specific lifting project or a set of casters for lift mobility, we've got you covered. Even if you're finding that more and more of your business is coming from low-profile cars, we manufacture an arm adapter to lift them straight from the floor. Whatever your situation is, we've got just the thing to fully customize your two-post, four-post, parking, wheel alignment or specialty lift.

Pipe bender accessories
A top-notch BendPak Pipe Bender is a fantastic asset to any fabrication environment, but it's still only as good as the tooling options you choose. That's why we use only the strongest materials to ensure that BendPak dies never crack or break. They may look like ordinary dies, but these heavy handfuls are something exceedingly special. BendPak uses an exclusive relief cut design on our bending dies to help maintain the pipe's uniformity throughout the bend cycle and eliminate excessive crimping or deformation. Plus, with our 180° bending dies, you'll get perfect deep bends on a 5" without having to worry about sticking or hang ups.

We're also proud to offer an exhaustive BendData card system to guide you step-by-step when fabricating original equipment exhaust and tailpipes. This incredible system has information on domestic and light trucks as far back as 1965, so you'll know the exact specifications you're bending for.

Air compressor accessories
BendPak's useful compressor accessories help you extend the utility and longevity of your air compressor. For TRI-MAX™ Air Compressors, check out our anti-vibration pads, Moisture Minder® and Moisture Minder® installation kit. Or, if you're the proud owner of a BendPak LS15RS Rotary Screw Air Compressor, consider an incredible 120-gallon capacity Manchester receiver tank. With it, the air can keep coming—even when the compressor isn't running!

Use the handy slider at the top of the page to browse and compare our full offering of BendPak accessories, or click on another product section using the navigation bar to see something completely different.