RIC-4716 4-Bar Tire Inflation Cage
4-Bar Tire Inflation Cage
At Ranger Products, all of our tire inflation cages are constructed with your safety in mind. They meet strict OSHA Standards for tire service workplace safety and can accommodate virtually every type of tire and wheel combination ranging from small passenger vehicle tires to long-haul truck, bus, off-road and military tires.
    At Ranger Products, all of our tire inflation cages are constructed with your safety in mind and the safety of your employees. They meet strict OSHA Standard 29 CFR 1910.177 requirements for tire service workplace safety and can accommodate virtually every type of tire and wheel combination ranging from small passenger vehicle tires to long-haul truck, bus, off-road and military tires.

    Tire_Inflation_Cage_OSHA.jpg

    The RIC-4716 inflation cage is designed using 2-3/8” diameter, high-yield, seamless steel tubing with expansion properties to ensure strength, durability and safety. The gradual upper-arched mandrel bent tube design yields maximum space and is engineered to withstand and contain wheel and tire projectiles under extreme tire ruptures preventing potential injuries or deaths. The RIC-4716 stands 49-1/2" tall and 21” wide and features four welded-steel bars in order to meet the demands of all wheel service shops. It can handle tires with a maximum width of 16" and maximum diameter of 47" delivering full-capability performance. A solid-steel welded-steel base features a full-width angle-iron wheel cradle to keep the wheel safely contained within the inflation cage during all inflation procedures.

    IMPORTANT NOTE: Exploding tires have a high potential for severe injury and death. Tire inflation safety cages are a mandatory precaution for safe tire inflation. Tire inflation cages provide valuable protection and exceed the OSHA Standard 29 CFR 1910.177 for servicing multi-piece and single-piece rim wheels. ALWAYS follow all warning and product instructions when using any inflation cage in order to prevent potential injuries or deaths.

    This checklist covers regulations issued by the U.S. Department of Labor, Occupational Safety and Health Administration (OSHA) under 29 CFR 1910.177.

    https://www.osha.gov/Publications/wheel/wheel-chart-booklet.pdf




    • 2-3/8” diameter, high-yield, seamless steel tubing.
    • 4-Bar welded-steel construction.
    • Gradual upper-arched mandrel bent tube design yields maximum space and is engineered to withstand and contain wheel and tire projectiles under extreme tire ruptures preventing potential injuries or deaths.
    • Solid-steel welded-steel base.
    • Four tubular steel base frame supports keeps cage elevated off the floor to prevent rust and corrosion.
    • Full-width angle-iron wheel cradle.
    • Max tire width: 16" / 406 mm.
    • Max tire diameter: 47" / 1194 mm.
    • Height: 49-1/2" / 1257 mm.
    • Width: 21" / 533 mm.
    • Depth: 27” / 686 mm.

    Video_Library_Icon.png
    4-Bar Tire Inflation Cage
    4-Bar Tire Inflation Cage
    OSHA Standard 29 CFR 1910.177
    RIC-4716 inflation cage OSHA
    Tire Inflation Safety

    Featured accessories for the RIC-4716


         Call Us Toll Free:
    800-253-2363



    deliverydetails.jpg

    Request More Info on the RIC-4716!

    Quick Specs

    • Max tire width: 16" / 406 mm.
    • Max tire diameter: 47" / 1194 mm.
    • Height: 49-1/2" / 1257 mm.
    • Width: 21" / 533 mm.
    • Depth: 27” / 686 mm.
    View Full Specs »
    ©2016 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk