TS-580V-601 Elite™ Air Compressor, 5 HP, 80‐Gallon Vertical Tank
Best Air Compressor for Sale by BendPak
BendPak Elite™ air compressors are designed with energy saving in mind. They’re built for efficiency and lower operating costs, producing more compressed air at a lower horsepower.

    High-quality, slow running cast iron compressor pumps deliver proven longevity in the most demanding conditions. Because they run at a slower RPM than most comparable units, they’re quieter, run cooler and cost less to operate. 100% cast‐iron pumps provide the quality and performance needed for heavy‐use applications like automotive and body repair to manufacturing and industrial service.

    Air Compressor Hydraulic Pump

    The 2-stage, twin piston pump features splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling. Heavy‐duty, disc‐type valves are dependable and accessible without having to remove the cylinder head or performing other complicated valve maintenance procedures. A built‐in inter cooler and air‐cooled after cooler chills the air resulting in reduced heat and condensation moisture.

    Air Compressor Cooling Fan
    Cast Iron Compressor Pump


    • Extra-quiet, low-RPM pump
    • 5 HP energy‐efficient motor
    • Pressure switch controlled ensures efficient operation at all times with no wasted energy
    • Cast‐iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with a pressed‐in sleeves do
    • Cast‐iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
    • Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
    • Fully‐enclosed belt guard
    • ASME rated tank
    • Large surface area and cooling fins on cylinders and forced‐air aftercooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
    • Precision honed cylinders increase efficiency and oil control
    • Oversized ductile iron crankshaft provides extra strength and longer wear
    • Tapered roller main bearings provide full contact and support of the crankshaft and needle‐type piston pin bearings properly distribute bearing loads
    • Precision balanced flywheel has forced‐air fan blades for optimum compressor cooling and life
    • Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation
    • ASME rated safety valve protects the compressor from overpressure and safeguards the operator
    • Balanced flywheel and counterbalanced crankshaft provides vibration‐free operation
    • Readily accessible disc‐valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
    • Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
    • High‐density, die‐cast aluminum alloy rods minimize reciprocating weight
    • Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
    • Automatic pressure switch provides auto start and stop
    • Integrated pressure unloader valves are built into the intake valve assembly on the compressor head reducing internal pump heat from initial start‐up compression
    • Pressure gauge with service valve
    • Oversize replaceable air filter

    • Tank: 80 gallons / 300 L / Vertical Tank
    • Voltage: 208 - 230 V
    • Horsepower: 5 Hp
    • Phase: 1 Ph
    • Hertz: 60 Hz
    • Running Load Amps (SFA) 26-23.8A
    • Peak Start-up Amps 54-48A
    • Recommended Breaker 30A
    • Noise level: 75 dB
    • Pump Style: 2-Stage/2-Piston/Vertical
    • Pump RPM: 625 rpm
    • Motor RPM: 1740rpm
    • Lubrication: splash / oil
    • Cubic feet per minute @ 90 psi: 17.9 CFM
    • Cubic feet per minute @ max psi: 17.2 CFM
    • Max psi: 175 psi
    • Shipping weight: 619 lbs. / 281 kg
    • Shipping dimensions: 39" x 26" x 79" / 991 mm x 660 mm x 2006 mm
    Best Air Compressor for Sale by BendPak
    Best Air Compressor for Sale by BendPak
    BendPak Elite Air Compressor
    Compressor Pressure Gauge
    Air Compressor Cooling Fan
    Air Compressor Switch
    Cast Iron Compressor Pump
    Air Compressor Nozzle
    Bottom Compressor Fitting

    Featured accessories for the TS-580V-601

         Call Us Toll Free:


    Request More Info on the TS-580V-601!

    Quick Specs

    Horsepower: 5 Hp
    Tank: 80 gallons
    Voltage: 208 - 230 V
    Phase: 1 Ph
    Hertz: 60 Hz
    Peak Amps: 54-48A
    Max psi: 175 psi
    Max CFM: 17.2
    View Full Specs »
    ©2016 BendPak, Inc. All rights reserved. Site Map | Policies | Careers | FTP | RATZ Check | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk